BRZ Resurrection Part 5 – Wheels, Spacers, & Rocket Bunny Test Fit



In this episode Chris fights the good fight with wheels, adapters, and proper wheel spacing for the rocket bunny kit.

source

You May Also Like

About the Author: Rafael

AngelHouse © 2009 - 2018 Hosting By phillyfinest369 Server Stats & The Idiots Robots and Control Inc.(RSS FEED MODULE) - All YouTube Videos is a register trademark of Google Inc. The Youtube Channels and Blog Feeds is managed by there rightful Owners.

46 Comments

  1. Should of put some copper grease or anti cease in between the spacer adapter and wheel, left on for too long youll have a very hard time getting the wheels off the car, I know from experience

  2. Yo !! Have you had any dangerous problems with such large spacers?
    I drive in GT86 And i want install Rb kit.
    For the front fender it's 2inch spacer and for the rear ?

    Width of the tires and your wheels please ?
    I have 17×8 wheels and my tires are original.

    Front : 2inch ?
    Rear : 3inch ?

  3. how many inches do the flares add!? I an building a rocket bunny s13 and I'd like to know how many inches they add when the wheels offset is 0 to know how many inches spacers I'd need.

  4. A lot of you cats are missing the point ENTIRELY… They may not know exactly what their doing all the time, but that's where great builders come from: Trial and Error. I'm actually enjoying this, see a car being fixed up by someone who's passionate enough to not just send it to some shop. Anyone truly having an issue with this series has never really wrench'd on their own auto besides changing a dead batt or replacing a tire…

  5. how is handling with hose spacers ? i plan to do 2 and 1.5 inch spacers also and im afraid steering will be wobbly or will tend to pull randomly to the sides

  6. Great job with the build! Btw, im running Works XD9 at the moment and am planning to get 'em powdercoated. Gonna switch back to stock wheels for a while. Im a noob on spacers so i need some help. Do I need to replace the studs as well and what's a good brand?

  7. Hey part 5 of your wheel spacers. U did not say how big the new rims are that u r putting on with 2 inch spacers. Can u please let me know. Thx love your videos they really helpful.

  8. What is the offset on the wheels? I am in the process of doing a rocket bunny v2 wide body kit on my car but I can't decide on what wheels to get. I want 17×9 inch wheels so I can have good clearance but I can't decide on the offset, I would like to do single piece wheels to save money and complexity and probably looking for a 30mm offset (or smaller). I know I'm going to have to run spacers but I don't necessarily want to run a 2 inch😂 any thoughts on what offset I should do?

  9. tip when installing adapters on the front wheels stick a good screwdriver in the brake disc and torque them down. for the rear use e-brake..

  10. theres a reason why th steel lugs are more money. the aluminum ones are CRAP like absolutely horrible they strip the first time you take them off because aluminum is a softer metal

  11. You've got directional tyres but you put them on the wrong side of the car.
    The one shown on the right hand front should be on the left hand side.

  12. I doubt this BRZ will drift very well with them tyres, unless you change the engine or put some sort of forced induction on it, even with a turbo on the stock FA20 you won't see much power increase as the compression ratio of the FA20 is 12:5:1 it is way too high to put high boost pressure into it because it will blow up the engine, you should of changed the engine or pistons when it was easy to get to.

    too much grip and not much power.

  13. why would you use these spacers. get decent wheels with the right offset and width. spacers add a fuckton of unsprung weight. and are extremely bad on the wheel bearings. and this on a car that is all about handling … 🙂

Comments are closed.