Best Integra Type R Upgrade (So Far)

By far this is the best performance upgrade I’ve done to my 2000 Integra Type R so far. Not only was performance increased, but in my case, emissions as well. That is a very rare thing with performance parts in my experience.

I was lucky enough to purchase these exhaust parts used and I saved a ton of money as a result, but if you’re considering doing something similar to your vehicle, I strongly recommend quality exhaust parts like the ones I installed in this video.

I wish I had been able to dyno the car before and after the exhaust swap. Since I saved the old exhaust, that might be a possibility in the future. However, know that I do feel a ‘seat of the pants’ difference in the car with the new exhaust. I honestly can’t say enough good things about it. The car was fun to drive before, it’s even better now.

#ETCGVideo #ETCGBlackBeard #IntegraTypeR

Thank you for watching!

My Patreon Account: https://www.patreon.com/EricTheCarGuy

The best place for answers to your automotive questions: http://www.ericthecarguy.com

Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog

Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1?sub_confirmation=1

Links

Magniflow Catalytic Converter: https://www.summitracing.com/parts/MPE-334106

O2 Sensor Bung: https://www.summitracing.com/parts/VPE-1194A

Skunk 2 Alpha B Series V1: https://skunk2.com/exhaust-tuning/headers/alpha-header-765.html

Tanabe Exhaust: https://www.tanabe-usa.com/touringmedalion.asp?id=7

VHT Header Paint: https://www.amazon.com/gp/product/B0082LKN4C/ref=ppx_yo_dt_b_search_asin_title

Tools

Milwaukee Die Grinder: https://milwaukeetool.com/Products/Power-Tools/Metalworking/Grinders/2485-22

Grinder: https://www.jbtools.com/bosch-gws13-50-high-performance-angle-grinder-5/

Milwaukee Sawsall: https://milwaukeetool.com/Products/Power-Tools/SAWZALL-Reciprocating-Saws/SAWZALLS/2721-22HD

Sawsall Blades (better): https://milwaukeetool.com/Products/Accessories/Cutting/SAWZALL-Blades/SAWZALL-TORCH-Carbide-Blades

Milwaukee Light: https://www.milwaukeetool.com/Products/Lighting/Personal-Lighting/2114-21

Drill: https://www.milwaukeetool.com/Products/Power-Tools/Drilling/Hammer-Drills/2706-22

Center Punch: https://www.jbtools.com/general-tools-77-automatic-center-punch/

Stepped Drill Bit: https://www.jbtools.com/astro-pneumatic-9445-titanium-step-drill-bit-set/

Welder: https://www.longevity-inc.com/migweld-140

Related Videos

New Parts for My Acura Projects: https://youtu.be/ZUkL45LNJMk

Supercharger Tear Down and Inspection: https://youtu.be/aW8tiYgAPmU

EricTheCarGuy Gets an Integra Type R: https://youtu.be/_OfMvfFSztM

How I Got My Type R: https://youtu.be/fVkNTrWzgc4

Integra Type R vs Integra GSR: https://youtu.be/4tK85arURO0

5 Things You Should Know When Building a Turbocharged Engine: https://www.youtube.com/watch?v=9b0G4cI70as&t=253s

Why My New Turbo is Better: https://www.youtube.com/watch?v=2UoT0RvUosc

What Does “Clocking a Turbo” Mean?: https://www.youtube.com/watch?v=dLY3l9D_lro

How To Install a Holley Sniper EFI: https://www.youtube.com/watch?v=Pr-93jijuVo

Type R Playlist: https://www.youtube.com/watch?v=_OfMvfFSztM&list=PLSzhQ6St-ov0sJT52tXnm59Vbk1wCvhGd

The FairmontProject Playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs

ETCGDadsTruck Playlist: https://www.youtube.com/watch?v=kCepnacqRuI&list=PLSzhQ6St-ov1g_GML2aVq6EN-_ShJ9G2o

**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq

Social Network Links

Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts

Twitter: https://twitter.com/EricTheCarGuy

Instagram: http://instagram.com/ericthecarguy

Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content

Stay Dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

40 thoughts on “Best Integra Type R Upgrade (So Far)

  1. My cousin had a red one of those type R's back in the early 2000s
    His was stupid loud though. Awesome little car!
    From memory his one had Recaro race seats from the factory (his was a Honda, Not acura)

  2. From my experience, theses after catalytical converters, just don't work Honda, and Toyota, after market catalytic, £100, original £1300, big difference, in quality p0420, light

  3. I grew up in the 1980's on dairy farms of Pennsylvania. Every car we owned was 10+ years old and 100k+ miles. They all had the same exhaust sounds…it's normal, no issue…as explained to me….🤣😂

  4. When you weld a pipe or anything, you should do it like you tighten bolts on a tire, flange, engine cover or anything with multiple bolts. The reason being when you weld you heat the metal and expand it, and when it cools down, it shrinks. When it shrinks it pulls. So even if you have tack welded it, it still does it, just not as much. So when you start with tack welded parts aligned like this —I I— when you weld only one one side it can be like this –I /– (lower side welded only. Thats why you get misalinged flanges. Also why stanless steel can corrode is when you heat it, you evaporate some of the chrome from the surface o the steel. You create a chrome poor area. You can see this as a color change. Chrome is what makes it stainless. So you ideally should treat the surface with acid after welding it, to clean it and make it as it was before you heated it by welding. If you cant do it, second best is to grind it till its nice and shiny. Painting it works only for as long as the paint is intact and under the car its not ideal. If paint gets sracthed or whatever, the corrosion is even worse under the paint. Thats why you see rust under paint bubble.

  5. well done… beautiful sound.. way better than before… and i learnt heaps from this video and now i know how to inspect those boy racer cars' exhaust system… thank you

  6. Why not just buy a new Tanabe medallion touring catback, made for the integra? The fact it is a type r, it should be receiving the correct fitment axle back, at least. The muffler tip being that much shorter than the bumper looks awful. But props to the few replacements on the way!

Comments are closed.