How I Fixed #ETCGDadsTruck Engine

This is a followup to a recent video I posted about the engine in #ETCGDadsTruck, a 383 stroker, and the problems it had after it’s initial rebuild. Here’s a link to that video so you can get caught up.

What Happened to #ETCGDadsTruck Engine?: https://youtu.be/RNzrdexY_Hw

As of this posting it’s been about 2 weeks since I repaired the engine and I haven’t experienced any significant issues with the engine other than it’s running too cold, about 150ºF. I’m going to replace the thermostat with a 180ºF unit and recheck that issue in the coming weeks. Otherwise, it runs and drives great. I got my truck back!

Were you right about the issue the engine was having in the last video? If so, LMK in the comments. If not, tell me what you think I got wrong.

This is (Episode 33) in the #ETCGDadsTruck series.

Here is a video available to Premium Members of my website featuring the full, uncut test drive of the truck after these repairs: https://www.ericthecarguy.com/first-drive-new-engine-uncut-exclusive-video

My Patreon Account: https://www.patreon.com/EricTheCarGuy

The best place for answers to your automotive questions: http://www.ericthecarguy.com

Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog

Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1?sub_confirmation=1

Thanks for watching!

Music: Moonquake (Nana Kwabena) YouTube Music

Special thanks to:

Summit Racing: https://www.summitracing.com/redirect?banner=SOCIALFB190421

Edelbrock: https://www.edelbrock.com

Links

Info About Running Wider 2nd Ring Gaps: https://static.summitracing.com/global/images/instructions/slp-wr-9902-30.pdf

My engine parts

New Pistons: https://www.summitracing.com/parts/ros-91469/make/chevrolet?utm_source=etcg&utm_medium=social&utm_campaign=heads&utm_content=2019-05

New Piston Rings: https://www.summitracing.com/parts/slp-r-19100-35?utm_source=etcg&utm_medium=social&utm_campaign=heads&utm_content=2019-05

Head Gasket: https://www.summitracing.com/parts/fel-1003?utm_source=etcg&utm_medium=social&utm_campaign=heads&utm_content=2019-05

Edelbrock Pro Flo 4 EFI: https://www.summitracing.com/parts/edl-35760?cm_mmc=social-_-ETCG-_-edlprofloefi-2019-05

Windage Tray Studs: https://www.summitracing.com/parts/mil-81151/make/chevrolet?utm_source=etcg&utm_medium=social&utm_campaign=heads&utm_content=2019-05

Windage Tray: https://www.summitracing.com/parts/mor-23020?utm_source=etcg&utm_medium=social&utm_campaign=heads&utm_content=2019-05

Related Videos

What Happened to #ETCGDadsTruck Engine?: https://youtu.be/RNzrdexY_Hw

Last Minute Prep and Problems #ETCGDadsTruck: https://youtu.be/u0mBrFVET5Q

#ETCGDadsTruck Build Introduction: https://www.youtube.com/watch?v=kCepnacqRuI

Machine Shop Summary #ETCGDadsTruck Engine: https://www.youtube.com/watch?v=HvVw2MKdUzc

What is Detonation and How Can It Kill Your Engine: https://www.youtube.com/watch?v=BI5AmEPV4XY

383 Stroker Engine Parts #ETCGDadsTruck: https://youtu.be/sygI3OA4rfA

383 Rotating Assembly: https://www.youtube.com/watch?v=g_dPAptfxnY

383 Top End Assembly: https://www.youtube.com/watch?v=h7qowMqZXRA

Final Assembly 383: https://www.youtube.com/watch?v=H-PNL-x1dUs&t=615s

#ETCGDadsTruck Starts For the First Time: https://www.youtube.com/watch?v=e5bDArrWvnI

What Caused the Dipstick To Blow Out #ETCGDadsTruck: https://www.youtube.com/watch?v=e-6VffhVf30

#ETCGDadsTruck Playlist: https://www.youtube.com/watch?v=kCepnacqRuI&list=PLSzhQ6St-ov1g_GML2aVq6EN-_ShJ9G2o

The #FairmontProject Playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs

**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq

Social Network Links

Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts

Twitter: https://twitter.com/EricTheCarGuy

Instagram: http://instagram.com/ericthecarguy

Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content

Stay Dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

38 thoughts on “How I Fixed #ETCGDadsTruck Engine

  1. Man this video really made me happy. My engine just decided to start knocking in my first car. Luckily I had already started building a 383 just like yours. Only problem is that I'm a broke high school kid and time and money are the biggest hold backs. Hopefully soon I will have a fresh engine with tbi which will make a huge difference in my 80 camaro.

  2. GORGOUS ENGINE…I REALLY LIKE WHAT YOU DID ON THIS BUILD…SAD COMP WAS WAY TOO HIGH…BURN MARKS ON HEAD AND TAKING OFF THOSE SHARP EDGES IS A BRAVO MOVE…

  3. Eric I love the build. I'm doing a 355 build, pro max heads, forged internals and pro flo 4 intake kit. I'm looking at the same transmission controller you have. Was going from the oem wiring to the stand alone harnesses easy enough? Some days I feel like I'm over my head.

  4. Have you ever used or heard of “Indian hair” ? I’ve always had good luck with it. Permetex makes it. (Sure others make it too) how about you? Anyone else had luck, or try it?

  5. This is why you don't zero deck a street engine, don't let the machine shop fool ya, just take enough off to get the deck level that's it

  6. I was told after installing my long tubes to do a post warm retorque on the bolts.. might help the exhaust leak.. otherwise looks and sounds fantastic!

  7. Congrats Eric you did it! You know after thinking about your first engine build with the 11:1 static compression, if you had the right cam (bigger) it probably would have lived. I'm surprised you didn't go big block, lot more torque.

  8. Make sure your gauges share the exact same ground as to computer or there is going to be a small voltage difference and the gauges will be offset

  9. awesome you fixed the engine ^^ ,but got a question on the ticking noise when you started up the truck…whats causing it??? because that was the same noise i was hearing when you started the engine up the first time ???

  10. To see the final result was worth the trip. Great engine building experience. Preparing to build a stroker out of my 350ci in 87 vette

  11. Eric, how much did the exhaust leaks affect the O2 accuracy?
    I'm putting a wideband on my carbureted engine for AFR tuning and we all know how difficult it can be to eliminate leaks with headers.

  12. Hey Eric long time watcher first time leaving a comment. Have you dyno the truck and if so what kind of horse power did that engine end up producing?

  13. Eric, or anyone else wanting to chime in, would you personally still have decked the block if you had it to do over again? I'll be rebuilding a SBC soon and I was thinking about having the block decked but now I'm thinking not to. Thanks! 🙂

  14. Do you still have the radio and amp from the truck that you took the dash assy out of ? I need them for my 1990 chevy truck , can I buy them from you ?

  15. I use copper exhaust gaskets and header bolt locks. Just like imports you can safely reuse them. I might do a video on my 73 k10. I'm using a fitech set up for fuel injection. Similar problems with the way to high compression.

Comments are closed.