Mini Jet Boat Build Part 3: Destroying BRAND NEW Jet Skis For Their Supercharged ROTAX Hearts!

43 thoughts on “Mini Jet Boat Build Part 3: Destroying BRAND NEW Jet Skis For Their Supercharged ROTAX Hearts!”

1. I hit the button and I got distracted by something and when I looked back at the screen Cleetus was riding a motorcycle attached to ropes. And I wasn't surprised but I was a little confused,lol.

2. What ever happened to this series?

3. The second one will be easy!

4. Next time when drilling and tapping UHMW Use parafin candle wax on the drill and tap combo. For the 82* counter sink, use a 6 flute cutter. Much less wear and tear on you and the tooling.

5. Meanwhile………..over at Mr Bogetti's shop AKA "Eunuchsville"… xD

6. Now ya did eventually "De-Stress" that Duralon material with a heat gun after ya screwed it down?

7. Music cue at 14:47 was magical.

8. Cleetus vocabulary
   Dialed
   Unit
   Ripper
   Feel free to add to the list

9. that motorbike swing might be the single most "Florida man" thing you have ever done, and i kind of want one now

10. X3

11. I wanty 😍

12. You could have gone through an auction place on line and got faster ones for less.

13. Uhm swells with salt water

14. Wouldn't those Jet skis be lighter and faster and more fun ? It's like taking the motor off of a crotch rocket and putting it in a tractor. Kind of pointless really. Should have put LS motors in them. 1000HP for Dale Bruther.

15. James boat needs a lightening mcqueen inspired wrap job….. miami vice works but make that windsheild needs eyes on it lol

16. Danny duncan did that originally

17. You need to get a couple Seabreachers to mod to go faster and deeper in water..

18. Should have put big block engines in them

19. Uh, did James say sledge hammer in the ass?

20. Grind a chamfer on the front of that plastic, it'll get you a couple MPH for sure.

21. Before i even see it in the video, you best be injecting sealant into all those holes.

22. Am I the only one that was blowing at the screen to blow off all that plastic shavings? hahahhahahaha

23. Rob a strip club! I love it!!!!
    Hell yeah brother! Got to have a little fun , hilarious!!🤣🤣😭

24. Good move, calling emergency services BEFORE you submerge the fan in the poop, set it on fire and throw it in the wood chipper. I'm gonna go hang a forklift and two flatbed trucks from a tree and make me a florida man wind chimes

25. HUm.. Dont you think you should have put some kind of sealant on the threads of the bolts to keep things watertight?

26. Hell yeah

27. NGL That tire swing looks like a lot of fun!

28. How long before a 427 is dropped in like them jet boats nz

29. Wait Wait Wait! Does this mean you will be installing a Hayabusa engine on the jetskies? Now that is a good idea Cleetus.

30. Future reference take the pump out first

31. This is great. Funny intro

32. Crash em into rocks? More like people need clean titled hull #'s for nefarious reasons

33. James is always the one that’s like “yeah I’m not too sure what to do here” and in 3 and a half hours there’s nothing but shell left with a nitrous kit on the table 😂

34. Those boats are going to be nuts.
    Just caught a vid of some similar ones https://www.youtube.com/watch?v=18cG7aF4gdo

35. I would have put a little dab of 5200 in each hole before putting in the screws, just so you know it wont leak.

36. You need to talk to JP racing about the jet ski engines he is the man

37. Man I’ve always wanted to send you a message asking if you’d ever be interested in having a full time fabricator, bummer!

38. if you get bored with what you're doing go buy another Leroy and do a OG style Leroy… That's what we want to see OG Leroy

39. The swinging from a tree dirt bike. Am I the only one that's thinking how horrible of an accident that could be?

40. A 300HP ENGINE IN MY CAN AM SPYDER?!! OMG…

41. guys, put silicone in each hole… water will infiltrate.. I've been there!

42. One question, where are the heat exchangers going?

43. So Leroy and ruby are gonna road trip to Alaska towing jet boats?? Lol

Comments are closed.