The grueling Street Outlaw schedule is starting to take its toll on these cars and we weren’t immune!
Be sure to drop a comment and subscribe to keep up with what we got going on around 187 Customs!
Follow Us!
https://www.facebook.com/187Nova/
https://www.facebook.com/187customsLLC/
https://www.instagram.com/murdernova/
https://www.instagram.com/187customs_/
https://www.instagram.com/phantom405/
Get your official Murder Nova and 187 Customs apparel or order parts for your hotrod at:
https://www.themurdernova.com
🇺🇲When I install my cam shaft I just spit on it and ease in just the tip slowly.🇺🇲
Now ladies and gentlemen that's how u lube your camshaft up 🤷🏽♂️😂😂😂
Gorilla Lash set at FULL SEND…. Sorry bro
Aye bro do you paint your toe nails black? Wtf lol
Badass ☆
👍
Could have been a lot worse
I'm seeing a merch opportunity y'all seem to be missing here.
187 Flip Flops (405 Flip Flops too)
Have it on the soles in a relief pattern so when you walk on soft ground (or fresh rubber) you leave nice little 187/405 tracks everywhere.
You could leave your mark everywhere… like a big dog with a bladder issue.
Shawn has a pretty big "shaft" for a white guy.
Better than street outlaws
Cant get enough of the og group Street Outlaws show since day 1. I'm a pro auto tech from northeast PA, just watched the service generator skit earlier today, LMAO, you guys are awesome!! You need tech support to know about that genius elevation switch lol!! Lookn foward to more videos.
Whatever happened to The dude called Kentucky that worked with Shawn? He was on the podcast too.
Murder nova and “little chief” come get some on our Michigan highways. I got 10-15 big and small tire cars ready to rock your world. https://youtu.be/-Q3xAyVcmiE
Is the new cam a 4/7 swap or is that what the old cam was? Man, catching it before the needle bearings in those lifters scattered all throughout the engine was huge!!
Hard ass work being a racer! Especially drag racers, they non stop break stuff! Just the nature of things when there pushed to the limit and beyond sometimes!
I'm curious to see the firing order 👀
It's cold out said the guy in basketball shorts and flipflops LoL.
Can you help me out I have a 94 trans am with obd1 how or what can I do to change settings in Computer
In out in out and shake it all about✔
……….. YOUTUBE ……………….. PRO TREE VIDEOS …………….
Out of curiosity, were the lobes being damaged all intake or exhaust ?
👍👍🇨🇱
Great job!!! I hope!!!😁😁😁🇺🇸🇺🇸🇺🇸
Awesome man!! Good luck!!
Hey just a thought here but it sounded like Shawn was being awful hard on those cam bearings, especially when he had to put the cam in the second time. Threading a long bolt into the front end of the camshaft would have helped a lot as it would have given him more leverage to maneuver the cam through the cam bearings without marring them up.
Where is the new murder nova???
85 >shaw relle racy
Every day .you show
Eiks nii
Family fyrts
Se ajaa jos sitä kiinosttaa
Heii jos se haluu ajaa.vittukse meeten kiusaa.sillä on oma family
Camera man keep roud race
Tämä hoitaa eikä on bull chit.family ja kaikki muutlkin hoitaa
Those lobes are huge! What lift is that cam, if you will share?
Shawn, get yourself a petzl headlamp – that way you don't have to stick a dirty flashlight in your mouth….
Where's the Team to help? Anything you need, right. Chuck should be there cause we know his stuff is got a fork in it.
What I like to use to precoat things like cams before putting them in is transmission additive like Trans Medic, Transmission Fix, or even Magic Mystery Oil.