#FairmontProject Final Fitting (Part 1)

Previous video in the series: https://www.youtube.com/watch?v=PbsLo1EXjU0

In this installment I work on installing the reverse rotation water pump, the carburetor, the alternator, heater hose connections, and I attempt to install the AC compressor. Since none of this fits into a nice neat little video I decided to call this a “Final Fitting” video.

This is the part of the build that my seem less than glamorous, but it’s just as important as everything else. If you don’t have all these smaller systems working together, you’re not going to get very far.

Anyway, I’m hoping the tips you see in this video are helpful to you not only with your project car, but also with your other projects. How effective you are often comes down to your approach, and your tools come to think of it. Either way I wish you good luck and hope that you enjoy watching my video.

The #FairmontProject playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs

The best place for answers to your automotive questions: http://www.ericthecarguy.com

Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog

Camera: Brian Kast

Thanks for watching!

Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/67532-fairmontproject-final-fitting-part-1

Steve Darnell: http://www.welderup.com

The parts I used

Alternator: https://lmr.com/item/SVE-17046K2/Mustang-SVE-130-Amp-Alternator-Upgrade-87-93-50L

H2O Pump: https://www.summitracing.com/parts/edl-8840/overview/make/ford

Mishimoto Hose Kit: http://www.americanmuscle.com/mishimoto-radiator-kit-8693-man.html

AC 134a Kit: https://lmr.com/item/HW-19712C/82-86-Mustang-50L-A-C-Conversion-Kit-R-12-To-R-134A

Blow Through Carburetor: http://www.jegs.com/i/Demon-Carburetion/333/MAD-750-BTK/10002/-1

Related Videos

Removing the old engine from the Mustang: https://www.youtube.com/watch?v=5wINaHUrX7o&t=905s

Replacing the K Member #FairmontProject: https://www.youtube.com/watch?v=ezbTvonGpi8&t=790s

Installing the Front Stabilizer Bar: https://www.youtube.com/watch?v=9okDlsmIfWQ

Relocating the Battery #FairmontProject: https://www.youtube.com/watch?v=IF8cHIjmUY8

#DarkMatterPikachu on the Dyno: https://www.youtube.com/watch?v=UADOHm6-BJc

Engine Balancing Video: https://www.youtube.com/watch?v=XjuGkXpha8Q

**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq

Social Network Links

Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts

Twitter: https://twitter.com/EricTheCarGuy

Google+: https://plus.google.com/100195180196698058780/posts

Instagram: http://instagram.com/ericthecarguy

Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content

Stay Dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

source

Author: avn bot

ANGELHOUSE © 2009 - 2020 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)