Ruby Had a Ridiculous Failure at the Track… Probably the LAST THING We Expected!

RESTOCKED CLEETER MERCH!!!!! Grab yours here – https://www.cleetusmcfarland.com
The quest for sevens is getting ridiculous… this is a BATTLE!
Our 2020 Sponsors:
https://www.holley.com
https://texas-speed.com
https://www.motionraceworks.com
https://www.nittotire.com
https://www.summitracing.com
https://heatwavevisual.com

Check out our schedule for 2020 here – https://www.cleetusmcfarland.com/year2020/
Cleetus2 Channel – https://goo.gl/Ph2wyo
Holley’s channel – https://www.youtube.com/channel/UCeQfJXzg0gnfuM4tgmagCCw
**Social Media:
Instagram – https://goo.gl/LZvy5e
Facebook – https://goo.gl/gdwhh1

**SEND ME FAN MAIL… (bald eagles welcome)
Cleetus McFarland
12961 44th St N. Ste B
Clearwater, FL 33762
United States of America

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

44 thoughts on “Ruby Had a Ridiculous Failure at the Track… Probably the LAST THING We Expected!

  1. Ever thought about using 2 screw clamps connected together? If you are going to use zip ties… get them a little beefier… those look like they might hold up to 80 mph…

  2. 3.60 gears? And a Powerglide? You should be runnin about a 4.10 to 4.30 with a Powerglide. I've seen some stock eliminator guys run 5.13 or 5.38s, but they had small, unblown engines.

  3. Micropolishing helps a little bit with losses but shot peening can give a lot of strength advantage by reducing possibility of fracturing.

  4. Bro put a spacer behind the wheel bearing assembly before you put the shaft in… That will push the drive shaft in towards the diff a little… It will give you that extra inch that you need for a good connection in your drive shaft cup…

  5. I'd love to see Ruby's headlights replaced or at least the lenses switched out. Only $90 for a lens replacement kit I hate seeing that yellow fog on those eyes 😵

  6. OK, maybe I need to go back and watch some episodes… I have been away for a while. I thought Ruby was supposed to be a junkyard build, that car is far from anything junkyard anymore.

Comments are closed.