For those of you worried about the engine block in my last video, worry not! I’ve already been working with Kevin and Justin of Kalvinator engines in Wapakoneta OH to rectify the problem. This teaser is just a taste of the series of videos we produced with Kevin and Justin. Trust me, you won’t want to miss them.
When will these videos be coming out? Hard to say. Based on my estimates, the engine videos will start to air in August of 2016. Don’t worry, there’s plenty of other Fairmont videos to watch in the mean time. Here’s a link to the playlist.
Fairmont Video Playlist: https://www.youtube.com/watch?v=BhbI4c6UFiQ&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs
Here’s a link to Kalvinator Engines: http://www.kalvinatorengines.com
Here’s a link to my blog with up to date info on the build: http://www.ericthecarguy.com/blog
Follow me on my social networks for even more up to date info. Links to those at the bottom of the description.
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Camera: Brian Kast
Thanks for watching!
Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/64089-fairmont-engine-build-w-kalvinator-engines-teaser
**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Google+: https://plus.google.com/100195180196698058780/posts
Instagram: http://instagram.com/ericthecarguy
Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
So almost 2 months later? is there a video still coming out? or did i miss a update or something
frische kerle !
Fairmont is spelled wrong Eric!
Eric, please post the videos asap because I've become an ETCG addict! <3
my guess is that they sleeved the cylinders….
I hate you.
ok great, thanks for the update
Are you going with an aftermarket block? Aren't factory 5.0 blocks only good to around 500hp? Seems like a lot of work to install a turbo kit for only 500hp.
nice "Sleeper" project ! I love turbo charged cars, My current sleeper is a stock looking FIAT 500 Abarth,I took most of the Abarth body trim & graphics off so it looks like a normal Fiat grocery getter, a wolf in sheeps clothing sits 250 hp turbocharged Scorpion. I hope your "Sleeper" project turns out to be as axciting as mine did !
We waited for this….time to move over to SMA channel it's all content and no fuckery
SUCH A TEASE!
Are you gonna stroke the engine out to higher displacement? Would be simpler than buying a new engine but then again I don't think forced induction works well with high compression (with gasoline that is).
Did you re-sleeve the bad cylinder?
that was just wrong
need more fairmont Vids !
oh baby !
Nice one YouTube – a 1:05 ad for Wix, then 44 seconds of ETCG trailer. Makes sense. Nonetheless, I look forward to the series Eric!
The bores are getting sleeved.
hey Eric just thought I'd tell ya I live in wapak and I graduated with Kevin let me know when your in wapak again I'd love to meet you
Hey Eric, check the spelling of the video title! 😉
H Y P E
fuck you Eric. this kills me
Tune in next time, same bat channel, same bat time……….Great stuff, really enjoying this project.
Eric… this is painfull. One of the most exiting builds you have done and you are teasing us with it. how could you
whhhyyyy I didn't see the teaser part!!!!! I cant wait for these videos
What's in the booooooxxxxxxx??????????
#fairmont********project
wapak ohio, I'm like 30 min away. you live in Ohio yourself
Coyote.!!!????
check spelling of youtube video title 🙂
Oooh teasers 🙂
O Christ Not You HaHa
ooooooo resurrecting the old 302 ? thought she was a goner
Not fair for making us wait.
DAMN YOU ERIC!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Just kidding have a great day and if its your Birthday Happy Birthday…
I can´t wait to see that! =)
Why Eric?!?!?! Why do you torture us…. just post them!
Kevin and Justin made me crack up even though they didn't even say a thing 😀
hey it seems Eric is going to build a boosted stroker 5.0 to compete against MCM Double Unicorn
Hey Eric, typo in the title. #grammarnazi 😉
We're excited man. We're ready to see some footage!!!!