How to Clean and Replace an EGR Valve P0400

Clogged or Low Flow EGR? Learn how to clean carbon buildup in the EGR valve which can cause check engine light codes P0400 though P0408. I also show you how to test your EGR valve to make sure it is working properly or if you need a new one.

Where I got my EGR Valve: http://www.carpartkings.com/emission-control/egr-valve.html?utm_source=youtube&utm_medium=video&utm_term=egr_valve&utm_campaign=chris_fix
The OBD2 Scanner App I used: https://www.youtube.com/watch?v=xPI36bKVCjk
Where to get the OBD2 Scanner I used: http://amzn.to/1XNUGfz

EGR Codes:
P0400 Exhaust Gas Recirculation Flow Malfunction
P0401 Exhaust Gas Recirculation Flow Insufficient Detected
P0402 Exhaust Gas Recirculation Flow Excessive Detected
P0403 Exhaust Gas Recirculation Circuit Malfunction
P0404 Exhaust Gas Recirculation Circuit Range/Performance
P0405 Exhaust Gas Recirculation Sensor A Circuit Low
P0406 Exhaust Gas Recirculation Sensor A Circuit High
P0407 Exhaust Gas Recirculation Sensor B Circuit Low
P0408 Exhaust Gas Recirculation Sensor B Circuit High

How to Flush Power Steering Fluid: https://www.youtube.com/watch?v=A0fiZCHz5ew
How to Replace an Oxygen Sensor: https://www.youtube.com/watch?v=_Kr-c8eBl5E
How to SUPER CLEAN a Windshield: https://www.youtube.com/watch?v=vJkfrY2owb0

**If the video was helpful, remember to give it a “thumbs up” and consider subscribing. New videos every Thursday**

-Website: http://www.ChrisFixed.com
-Facebook: https://www.facebook.com/chrisfix8
-Twitter: https://twitter.com/ChrisFixed
-Instagram: https://instagram.com/chrisfixit
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7
-YouTube Channel: https://www.youtube.com/ChrisFix

Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

28 thoughts on “How to Clean and Replace an EGR Valve P0400

  1. hey man, super nice video, nice vet by the way super clean engine… i got a thing for you.. What do you think about take out the egr system? i read a lot about it and saw a lots of pros and con; i got a explorer 2004 xlt and whant to take it out, in my country (Venezuela) non of that it's illegal, but i want your opinion about it, Thanks

  2. I get a check engine light once a year for a day. But it goes off for 99% of the year. I have a 1993 Dodge Ram B250 V8 van with the older non electric EGR in it. My EGR transducer has been vibrating (sounding like water faucet pressure squeeling sound when the engine usually is heading uphill), for a while, now. Is there a diaphram inside this black saucer shaped transducer that is likely ripped? I initially didn't know what these parts were called and how to google them. Now I have solid knowlege. Thanks!

  3. EGR makes your car run better? Uhm…….never has, never will, it only makes your motor pollute inteslf instead of cutting the emissions by 0.00001%. The only thing that should ever be done to EGR, is get ripped into pieces and thrown out. And maybe stepped on few times

  4. Amazing video! Love your work chris! Keep it up man! You may have just saved a decent chunk of money! Thank you man! You deserve the absolute best sir!!!

  5. The pointless shingle parallely melt because nut disappointedly repair astride a elfin chime. trite, flowery march

  6. I paid these clowns a lot of money to replace the head gaskets etc on my 93 Buick Park Avenue. I get the thing back and now throws service engine light codes 54 55 56 and 58. OBD1. Some are EGR related…it is a electric unit..does it need to be changed?

Comments are closed.