Kryptonite For Stubborn Screws – The Shake-n-Break

Wivco Design Shake-N-Break™: https://www.wivco.com/store/p3/Shake-N-Break™.html

Wivco Design Website: http://www.wivco.com

Recommended Air Hammer: https://www.jbtoolsales.com/ingersoll-rand-121-k6-air-hammer-kit-401-shank-super-duty#oid=1002_1

Wivco sent me this tool a little while ago. I was waiting for an opportunity to try it out. When this RL came in for a brake job that required me removing the rotors, I thought this would be a perfect opportunity to try out the tool. It worked flawlessly as you see in the video. I think I’ll put my impact driver away the next time I need to remove rotor screws.

I’m sure this also works on other screws that might give you similar trouble. I was sold after it got these rotor screws loose.

Wivco did not pay me to say any of this. When a tool works, I’m happy to talk about it.

Thanks for watching!

The best place for answers to your automotive questions: http://www.ericthecarguy.com

Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/63234-kryptonite-for-stubborn-screws-the-shake-n-break#163240

Related Videos

Alternative Method of Removing Rotor Screws: https://www.youtube.com/watch?v=YxQk7Pz_vfc

Useful articles.

Engine overheat: http://www.ericthecarguy.com/faq/what-to-do-when-your-engine-overheats

No start problems: http://www.ericthecarguy.com/faq/solving-automotive-no-start-problems

Idle issues: http://www.ericthecarguy.com/faq/solving-automotive-idle-problems

Performance issues: http://www.ericthecarguy.com/faq/solving-automotive-performance-issues

Diagnosing Noises: http://www.ericthecarguy.com/faq/diagnosing-noises-in-your-car

Diagnosing Vibrations: http://www.ericthecarguy.com/faq/determining-the-causes-of-vehicle-vibrations

Electrical Problems: http://www.ericthecarguy.com/faq/solving-automotive-electrical-problems

Brake Issues: http://www.ericthecarguy.com/faq/solving-brake-problems

Transmission issues: http://www.ericthecarguy.com/faq/solving-transmission-problems

HVAC problems: http://www.ericthecarguy.com/faq/solving-automotive-hvac-problems

Buying a Used Car: http://www.ericthecarguy.com/faq/what-to-look-for-in-a-used-car-purchase

Leaks: http://www.ericthecarguy.com/faq/finding-and-fixing-leaks

MPG: http://ericthecarguy.com/faq/finding-and-fixing-the-causes-of-poor-mpg

The best place for answers to your automotive questions: http://www.ericthecarguy.com

Social Network Links

Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts

Twitter: https://twitter.com/EricTheCarGuy

Google+: https://plus.google.com/100195180196698058780/posts

Instagram: http://instagram.com/ericthecarguy

Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content

Stay Dirty

ETCG

Tool Review Disclaimer: ETCG is not paid to do tool reviews. Yes, I get to keep the tools after the review, but I do not receive any financial compensation for any reviews. The views expressed in this video are my own and unsolicited.

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

50 thoughts on “Kryptonite For Stubborn Screws – The Shake-n-Break

  1. This damn thing is $60??? Looks like Mayhew makes a $20 alternative that might be better anyway. Looks like on the Mayhew, instead of a handle to turn it has a hex that you can turn with a wrench and instead of coming with different bits, the end is 1/2 or 3/8 square socket type so you can use whatever socket you want. A far more versatile and cheaper option.

  2. The first time I got those screws out, after all sorts of hammering and howling, I coated them with anti-seize and put them back in. I have never had a problem since and can take them out with just a regular old screwdriver. Just a dab of anti-seize works wonders.

  3. OMG! I bought this tool at a car show and forgot about it after putting it in my toolbox. Then I ran into a problem trying to loosen a ground screw for an a/c clutch. After totally stripping the Philips head ground screw with a screwdriver, I remembered having this tool. It worked like magic! I mean, M-A-G-I-C, even with the stripped slots on the screw head.

  4. Blue Point also makes one similar to that that has a 17mm hex on it to put Wrench on to turn that’s what I use if impact driver just won’t do the Trick

  5. I think this tool has a perfect application. I’ve used impact drivers with bits before and it’s not always guaranteed hey it’ll do the job and then you are out of luck and have possibly a stripped screw head. With this, from the looks, gives a much greater impacting force from the air hammer into the head of the screw and then allows you to easily turn it.

  6. I was really interested in this, after watching the video I think my impact driver works faster than this. If its reasonably priced I might still buy it.

  7. That’s because it’s not a Philips screw; it’s a JIS or Japanese Industrial Standard screwdrive.
    The difference is the walls of the slots in the JIS screw head, which are parallel and which will cause the regular style Phillips screwdriver to cam out of the screw as you’re trying to turn it.

    The “corners” at the center of a Phillips head screw have a slight radius, supposedly designed to allow the Phillips head screwdriver to cam out as a sign that maximum torque had been reached.

    Also, the JIS screw head slots have a shallower depth, preventing the taller head design of a Phillips head screwdriver to properly grip the sides of the fastener .

    Use JIS tools on Japanese cars-

  8. i find a 3/8 battery gun more effective faster and easier. if by chance my battery gun doesnt cut the mustard so to say then i whip out trusty impact driver which is far better than this.

  9. Eric, you are the man! I need this tool in my life!! I was dealing with those screws and they were a pain in the but lol!!! Thanks again!!

  10. I use a tang through screwdriver (sunflag) and hit it with a hammer while twisting and get them loose. Also I'm an experienced mechanic unlike most here on youtube that like to think they are after doing brakes once on their mums honda.

  11. This is an awesome tool for stubborn screws. I just wish it was 1/4 instead of 5/16 drive size. My air hammer destroys bits and next to impossible to get locally. I use it for getting the torx fasteners out of Jeep's almost daily. It's a life saver for me

Comments are closed.