EricTheCarGuy Answers Questions Live #31 12/3/2014

The next live hang out is scheduled for December 17, 2014 at 7pm EST. This will be my last live Google+ show of 2014 so don’t miss it!
Check my Google+ page for details: https://plus.google.com/b/100195180196698058780/100195180196698058780/posts

In this show we talked about restoring old vehicles, coolant leaks, fuel smells, lowering vehicles, smoke from your engine, AC compressor issues, no heat, power steering issues, and strange noises from you engine compartment. That’s not a lot of topics, mainly because there just weren’t a lot of questions posted for this weeks show. I’m hoping to see more of your questions in future shows and I’ll make sure I answer as many as I can.

If I didn’t get to your question I apologize. Questions posted after the event ends will not be answered. Questions posted to the YouTube video will not be answered. Next show is December 17, 2014 7pm EST though, or visit EricTheCarGuy.com 24/7/365.

Videos discussed in this hang out.

How To Bleed a Cooling System: http://www.youtube.com/watch?v=zUpXgAJ1gjU

Modified Vehicles a Technicians Point of View: https://www.youtube.com/watch?v=ECjMbkRjVzE

Finding Noises: http://www.youtube.com/watch?v=6mpNRJ7m-c8

Rebuilding Honda Power Steering Pumps: https://www.youtube.com/watch?v=ArxN8T_6PbI

How To Change Power Steering Fluid: https://www.youtube.com/watch?v=Iev1xIr345Y

AC System basics: http://www.youtube.com/watch?v=w17DpGCcRj8

AC Performance test: http://www.youtube.com/watch?v=XU_A4wNuHXI

Finding and Repairing AC leaks: http://www.youtube.com/watch?v=95RdGLFIbL8

Recharging AC systems: http://www.youtube.com/watch?v=lglPJuBXVeE

Useful Articles.

Engine overheat

http://www.ericthecarguy.com/faq/what-to-do-when-your-engine-overheats

No start problems

http://www.ericthecarguy.com/faq/solving-automotive-no-start-problems

Idle issues

http://www.ericthecarguy.com/faq/solving-automotive-idle-problems

Performance issues

http://www.ericthecarguy.com/faq/solving-automotive-performance-issues

Diagnosing Noises

http://www.ericthecarguy.com/faq/diagnosing-noises-in-your-car

Diagnosing Vibrations

http://www.ericthecarguy.com/faq/determining-the-causes-of-vehicle-vibrations

Electrical Problems

http://www.ericthecarguy.com/faq/solving-automotive-electrical-problems

Brake Issues

http://www.ericthecarguy.com/faq/solving-brake-problems

Transmission issues

http://www.ericthecarguy.com/faq/solving-transmission-problems

HVAC problems

http://www.ericthecarguy.com/faq/solving-automotive-hvac-problems

Buying a Used Car

http://www.ericthecarguy.com/faq/what-to-look-for-in-a-used-car-purchase

Leaks

http://www.ericthecarguy.com/faq/finding-and-fixing-leaks

MPG

http://ericthecarguy.com/faq/finding-and-fixing-the-causes-of-poor-mpg

Discussion about this Video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/55112-etcg-answers-questions-live-31-12-3-2014#120620

ETCG Forum: http://www.ericthecarguy.com/component/kunena/1-stay-dirty-lounge?Itemid=0

Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts

Twitter: https://twitter.com/EricTheCarGuy

Google+: https://plus.google.com/100195180196698058780/posts

Instagram: http://instagram.com/ericthecarguy

Information on Premium Membership: http://www.ericthecarguy.com/premium-content-streaming-etcg-content

Stay Dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

44 thoughts on “EricTheCarGuy Answers Questions Live #31 12/3/2014

  1. Hey quick question, I was wondering if there are any good books on automotive that you would recommend.  Was wanting to learn how to work on vehicles, took automotive in high school so I can do basic stuff, but I want to learn how to do the harder things.

  2. Hi Eric. After playing with engines myself. I have NEVER had one stall on me due to high oil pressure until recently.
    Engine would stall on cold if revved past 1500rpm. If i let it idle at 980rpm till it warmed up..the oil pressure would drop as it warmed, just enough to not let it stall.

    Has anyone else ever had this issue? This really got me by surprise. Petrol 4 cylinder engine with hydraulic lifters.

    I lost my hair trying to fault find that one!

  3. hey Eric, i got a 2000 ml320 mercedes and I was wondering if i need to do something different to bleed my brakes (ABS) or is just like regular procedure with the vacuum pump, Thanks for your help, you really are a very helpful man

  4. the person that had the 427ci crate engine question?    oil bubbling up the dipstick and overflowing sounds like you didnt vent the valve covers or install some sort of pcv system and your building up pressure.    

  5. Hi eric just wanted to say thanks for the video's I just subbed to your channel- I reeeeaallly appreciated the video on thermostats-I'm a complete idiot when it comes to cars and I am having an issue with my 81 GMC vandura overheating after driving 6-10 blocks. I had the  head gasket replaced about 4-5 months ago and now im having this overheating issue, mostly just wondering if my mechanic  screwed something up..? Im hoping its just a thermostat issue (imma try and fix that myself) and not the water pump.         
      any who thanks I appreciate the vids alot.

  6. Hello Eric, I have a 1996 Chevy k1500 5.7L vortec. I was told when I got the truck that it needed a water pump, which it did, and a fuel pump. However, when you turn the truck over aux you can hear the fuel pump. Is there a way to tell that the fuel pump is bad before either removing the box or dropping the tank?

  7. Eric, I have a 95 GMC 1500. When starting in the morning it cranks and cranks and will start after about 10-15 seconds.  Once the engine has been started and you shut it off then crank it again, it fires right up ( up to about 2 hours after shutting the engine off)  Any ideas? I do hear the fuel pump running when i turn the key to the first position.

  8. About the lowering of cars, Eric forgot an important point. If your car does not have abs, chances are you have a brake pressure limiter on your car. If you lower such a car, the car "thinks" the load on the car is increased. With that, the car will ALWAYS send less pressure to the rear wheels. So you want to get that adjusted as well

  9. hey guys , i own a 2013 5.0 mustang , all my oil changes where using the same oil and it was 5w20 something like that but recently i changed it to something different , iv been smelling a weird smell when i accelerate , is this something normal ?

  10. Hey Eric I really hope you can answer my question! I bought my first car on Oct 31st and it's a 1999 Acura TL 3.2L it has 200k on it and yesterday when I was driving it was fine, smooth I should say and then when I came to a stop the car started vibrating heavier than usual. Then out of nowhere the car turned off while it was in drive and I had to turn it in to the side and tried starting it but the engine was turning and the car wasn't starting until I waited about 5mins the car started up with no problems. Please get back to me man Thanks!

  11. i used to be a mechanic, but i abandoned ship, cause you don't give a rats about your viewers. I am an electrician cause of you. Thank You. I lost hope for the mechanic trade.

  12. ERIC BE CAREFUL OF FLASH UPDATES.
    Be sure to check the URL first before proceeding due a possible virus or malware attack. I've seen several versions of this fake FLASH update.

  13. Hey eric i have 09 tpyota matrix with a cartridge filter no matter what i do when i change it it always happens to have a small leak do you think this is an issue across most of these or could the housing be defective ive tried torqueing it to 18 lbs and using mobil one filter gets expensive

  14. hey eric i have a 2002 chevy blazer it wont shift out of 2 gear to 3rd gear i've changing the shifting solenoids changed the fluid and the filter and still having problems with it not shifting please contact me 
       

  15. Hi Eric. I have a 2003 subaru forester. I get 12mpg. I used a scan tool and looked at fuel trims. long term is -7, so it is rich, but not super rich. Both o2 sensors are functioning properly according to the scan tool. I replaced the fuel filter, spark plugs, plug wires, air filter, and did a fuel pressure test. I also inspected the gasoline and checked the gasoline's alcohol content. All has been within spec. Any thoughts?

  16. My name is Mike,  I have a 1993 Toyota camry,  idles ok when cold or when it's completely warmed up but between cold and warmed up it idles rough and when driving it bogs down so I ease up on the gas then reapply throttle and repeat until completely warmed up then it runs great. Is there a temp sensor I should look for ?

  17. everytime i check my oil
    its always within the boundaries of the dip stick
    been like this for a year and i have not changed the oil
    any ideas?

  18. ░░░░░███████ ]▄▄▄▄▄▄▄▄          
    ▂▄▅█████████▅▄▃▂           ☻/   
    Il███████████████████].      /▌    
      ◥⊙▲⊙▲⊙▲⊙▲⊙▲⊙▲⊙◤..      /    
    Bob is building a tank against google! Again!

  19. Hi Eric! I got a volvl v70 1997 20v AWD 270 000 KM
    When i changed my oil i used a product from valvoline to clean inside of my engine. After i drove the car on Hig rpm i can now hear a loud valve noise. 🙁 should i just drive it or start opening my engine to try to find the valve noise ? 🙁

    Thanks for your videos ! 😀

  20. Eric,
    I have a 1999 Silverado Z71 with a 5.3 Vortec and 4-speed 4L60E transmission. 211,000 miles. When it is cold outside, it shifts hard, especially shifting from 2nd to 3rd. Yet, when it is at operating temperature, it shifts perfectly. I am curious on why this does this, if not caused by just cold weather and cold parts themselves.
    Michael

  21. Hello Eric, My questions is do you recommend going to a fully auto-motive school or to a community college/technical college? What could be the differences? Disadvantages? perks?  

  22. '99 Pontiac Grand Am, 2.4l 4 cyl. My car has a small evap leak, that appeared last winter when I backed into a snow drift and got snow packed under the car.  I've replaced all the likely candidates(Purge valve, Vent  valve, Gas Cap). I can pressurize the lines to the front(from Vapor Canister forward, vapor canister is next to gas tank underneath), with no leaks. I can hear a leak when I pressurize the line from the canister into the gas tank.. I can't find it with soapy water(checked all visible connections in the area the sound comes from.) Planning on dropping the gas tank this weekend as the leak seems to be above it. Any input on where to look?

  23. I have a 1998 Oldsmobile Acheiva and I feel my mechanic has ripped me off. I brought my car in for a belt change and oil change, then shortly after, It developed an oil leak, power steering leak, even a windshield washer fluid leak. My idle sits at around 3500rpm (pretty high for my car) and now my A/C doesn't work. How do I go from here?

  24. I have a 2000 honda prelude creeping up on 199,000 miles. I noticed that my rear bumper is getting black residue on it. I assume from the exhaust, but is this normal and if not, what could it be?

  25. Hi Erik, I have a 5 cylinder 2006 Chevy Colorado with 145,000 miles. I'm recently started to hear like a rattling noise coming near the alternator. I checked the alternator and I'm getting the proper voltage. It also can be coming from a black cover next to the alternator(I have no idea what's under it). I'm not getting any check-engine warnings. Any ideas what it could be? Can my alternator be going bad but still be giving me the proper readings?

  26. Hi Eric I just bought a 1989 gmc. 1/2 ton farm truck for $500 and it's got everything perfect mechanically concerned but I was wondering if you had any good sites for auto shopping. Would like to here your opinion. Have a good day from alberta

  27. hey eric i have a 1987 trans am GTA and the heater core is leaking, i only drive her in the summer and about 4 weeks before snowfall, do you think i should just replace it or reroute the whole heat system?

  28. Here is a question about Acura/Honda. Since the Acura Vigor is basically Honda Accord (cosmetic differences put aside) can you mix acura and honda parts? And by parts i mean suspension/drivetrain/engine etc.

  29. I have a 2013 SI Honda Civic and the air pressure idiot light is on, I have checked the pressure in all four tires and the are correct. How do I reset it so that the console light goes off?

  30. Hi Eric, this is Jose from LA, CA. Love your Youtube channels. I have a 2003 Chevy Blazer, every time I turn left(u-turn) it makes a clank sound, so I don't over turn, but there's time I forget and I hear it, it makes me nervous as if the tire is going to come off, but not when I make a right turn it doesn't. What do you think it could be? Thanks.

  31. heyyyy ericcc. i just broke 2 glow plugs :O hehe. they are still inside, any tips on how to get them out? i see there is kits to buy. love ur info vids,,  jonny, ireland

Comments are closed.