Hub Bearing Replacement (Fast and Easy)

Wheel Bearing Replacement, Learn how to replace a wheel bearing hub assembly Fast and Easy!. You do not need to press this bearing in. You can use common hand tools to install it. This video shows a wheel bearing replacement for a Pontiac G8, but it will be similar for most cars and trucks that use hub bearing assemblies. I got a quote of $750 to replace one wheel bearing so doing this yourself saves you a ton of money!

How to tell if your wheel bearing is bad: https://www.youtube.com/watch?v=YvKWGjmPKoc
How to Replace a Wheel Bearing Hub Assembly (FWD): https://www.youtube.com/watch?v=fe_WtKIKlYA
How to Replace a Pressed in Wheel Bearing: https://www.youtube.com/watch?v=fLSXQ_LLpWY
Here is the longer, more in-depth version of this video: https://www.youtube.com/watch?v=04AyCYIUEWQ

Tools:
Slide Hammer: http://www.amazon.com/gp/product/B000I8R7EQ/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000I8R7EQ&linkCode=as2&tag=chri0e2-20&linkId=CCIB22RL5D4MMPUY
Socket Set: http://www.amazon.com/gp/product/B000LY5AKU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000LY5AKU&linkCode=as2&tag=chri0e2-20&linkId=PERCTXWXXMI6NSY5
Torque Wrench: http://www.amazon.com/gp/product/B00C5ZL0RU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00C5ZL0RU&linkCode=as2&tag=chri0e2-20&linkId=73AKF7MNIONV37ML
Here is the wheel bearing hub assembly I used: http://www.mevotech.com/product/hub-assemblies/

**If the video was helpful, remember to give it a “thumbs up” and consider subscribing. New videos every Thursday**

-Website: https://www.ChrisFixed.com
-Facebook: https://www.facebook.com/chrisfix8
-Twitter: https://twitter.com/ChrisFixed
-Instagram: https://instagram.com/chrisfixit
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7
-YouTube Channel: https://www.youtube.com/ChrisFix

Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

31 thoughts on “Hub Bearing Replacement (Fast and Easy)

  1. So I can buy the “wheel bearing and wheel bearing” kit and not do any hard work like the other videos showing only to remove the “wheel bearing”.

  2. Thank you for the great film. May I know the reason why on the mounting bolts instead of red threadlocker (how it was applied originally) was used the blue one? I work on one project and can't decide, which one better to use. If it is for removing easier in the future (in the sense without heating), but you removed it (w/red) using penetrant (no heat). Seems like red one will keep the bolts better. Thank you again.

  3. I have a 2007 mazda 3 2007 i need to know the part name were the rear wheel bearing and the roto brake and all those parts its mounting i need to buy it thnks have a great and bless night

  4. Hey Chris, I can't find proper alloys for my volvo s70 so I waz thinking of converting it to Japanese hub. Is it possible…. Can you do a vedio. Thanks

  5. can you expain how come you had to do the 120°?
    i did my calipers but didnt do that extra degree angle. theyre just fine but im kinda worried if i needed to do that extra step

  6. hey chris great video
    i got my wheel beating replaced and there is now a leek under middle of my car . any idea if it related? thanks , subscribed

  7. I don’t even have a Toyota anymore, and I nearly watched the whole thing because it was just that good. This is by FAR one of the best informational videos I’ve watched on YouTube, period. Thank you!

  8. Warning: You took the old screws to fix the brake. These screws were before fixed with torque and angle. So the screws were streched.
    If you fix these screws again with angle, the screws are stretched again. This is very dangerous, because the screws can break, if the are streched too much.

  9. Thanks for your help. Your video is the absolute best tutorial I have ever seen done. Perfectly put together. Each little step explained in simple terms and in sync with corresponding footage. Subscribed.

  10. hey chris- My ute manual says to "Replace front hub bearing grease " for every third service. Can you please make a video on this?? is it about repacking grease somehow? do I need a special tool? I don't know what to do!..

  11. Yank-bar-tool is interesting, you can use it back-wards. Using a hammer would be difficult, because there is no room inside the wheel-box.

  12. Wow your video was great. Really explained and showed everything. It was greatly appreciated although I probably won't be doing this. You did make me feel a little more confident if I wanted to try. Thank you

Comments are closed.