Sway bar link replacement ford explorer. Learn how to replace the sway bar end links on a Ford Ranger, Ford Mustang, Mazda B series truck, Ford Explorer, Ford Taurus, Ford F150, Dodge Ram, Chevy Silverado, and many other vehicles. There are two main types of sway bar end links, and this is one of them. Below is a link to a video on how to replace the other style.
Different Style Sway Bar End Link Replacement: https://www.youtube.com/watch?v=YqOsW1X1-O8
How to tell if your Sway Bar Bushings and End Links are Worn: COMING OUT SOON
How to Replace a Ball Joint: https://www.youtube.com/watch?v=ZztbAShnlxw
Where I get inexpensive sway bar end links: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=sway%20bar%20end%20links%20moog&linkCode=ur2&rh=n%3A228013%2Ck%3Asway%20bar%20end%20links%20moog&tag=chri0e2-20&url=search-alias%3Dtools&linkId=6TWTB5SJ73XRA7P4
and bushings: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=sway%20bar%20bushings&linkCode=ur2&tag=chri0e2-20&url=search-alias%3Dtools&linkId=HUVXS7Z35QYW5RWW
Socket set I use: http://www.amazon.com/gp/product/B000LY5AKU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000LY5AKU&linkCode=as2&tag=chri0e2-20&linkId=2PTRJQ3K3VMZ2UX6
Cutoff Wheel I use: http://www.amazon.com/gp/product/B0064UQO8M/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0064UQO8M&linkCode=as2&tag=chri0e2-20&linkId=6BOTBK737OWHM6FN
**If the video was helpful, remember to give it a “thumbs up” and consider subscribing. New videos every Thursday**
-Website: https://www.ChrisFixed.com
-Facebook: https://www.facebook.com/chrisfix8
-Twitter: https://twitter.com/ChrisFixed
-Instagram: https://instagram.com/chrisfixit
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7
-YouTube Channel: https://www.youtube.com/ChrisFix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.
just checked the sway bar links on my car, just found the whole rear left link is gone🤣 that explains the thunking ive been hearing 🤣☠
Very Good Job
Super nice video ,thanks
Good work bro I need the guidance
You sound upset are you ok bro? I’m worried 😟 your always upbeat something isn’t right?
I need an impact drill. I'm getting too old to break loose these things.
Perfect bro everything was clear and on point
Awesome job man👍
Thanks
What paint do you use for this project? By the way, very easy to follow. I realized I needed this repair today while installing running boards. Came here and I'm sure I can do this!
lol I feel lucky my links are so loose and easy to get off
Good video
Hey Chris I fixed my linkage and it won't crank it sounds like its flooding and I
don't see anything the sway bar would have pinched and it's never done this before. Any idea what it could be?
Your doing a Great job Chris !👍
Thanks dude this helped me a lot. Now I can fix mine.
Very helpful video! Thanks so much ! 👽
Sway bars just cause loss of traction. Who cares if the car sways
I need to do this on my 2001 chevy tracker,would cost at least $500.00 maybe more to have a mechanic at a garage to do this so im gonna attempt it myself
Wow Chis you torqued those perfectley that the torque wrench wasnt needed but just confirmed!
My sway bar is 1.075 th or 29mm I got 3 sets of Sway bar bushings for my truck from 16mm to 35mm I guess they have no true Bushings, I used the set of 28mm they are to tight, by Moog, 2003 Dakota 2 wheel drive . they keep telling me only 4 wheel drives use sway bars . WTF OH OH OReillys .
So with my lift kit on my truck I wouldn’t have to jack my truck up to change the 2 metal rods without removing the sway bar
I just ordered sway bar links and bushings for my '04 Trailblazer EXT. Not the same setup as you have here, but a good video!
Ставил это тюнинговое гавно.
На две недели хватило.
Поставил заводские потом.
I was doing brakes on my Ranger, and saw one of my link bushings had broken. It had been popping a little. This fixed it. I did the body mounts a while back. It rides really well.
This was a very well explained video. If I was t on oxygen I would do it myself.
thanks so much to knowlege
Sometimes I saw your videos just to listen "Hey Guys!!!" Chris Fix here
My truck only had one end link on lol feels better with new end links 👍
RULE #1 8:26
Always make sure her lips are on your swaybar 😎
I did this repair and now my Suburban has a slight shake in the front end when coming to a stop. Any idea what that could be?
Bro I am come back your company working ke helper mechanic
So happy I have a ranger again, cause these videos are EVERYTHING
Did you twist the lower nut to the sway bar link on upside down?
Those blue bushings are harder and don't have grease pockets inside, may look cool but are rubbish man, me thinks you'd have better put back the old ones my friend.
Let me fix that for ya: "forces the inside tire UP during a turn".
Bejad kanjut maneh peot euy
I like how you explain.step by step . You good
Do you have a video how to diagnose a noise come from a car?
I line an balance my car but it still drift to the right any ideas???? I change struts ball joint everything they say wheel camber an i fix that an it still drift i have to hold the steering to the left mostly
Are there any bush compressors ? i cant quite get the nut on the bolt because my
bushings are just a tiny bit thick. I am not strong enough to compress it with my bare hands.
I never back up a nut either ☺️
Good video — BUT — Sway bar bushing was installed backwards — crack goes to the BACK !
End Link nut was installed up-side-down. That's a NY-LOK nut, and it is always installed with the rounded part toward the end of the bolt. After completing sway-bar installs/upgrades on several types of vehicles, I've found that Energy Suspension has the best selection of top-quality Urethane components for both street and racing applications.
He forgot to mention when karts look this fucked up save time and money and buy new parts with bushes fitted everything so dam cheap now to buy new already bushings fitted
Dude you give the best tutorials… But I'd rather just give you some cash straight up to work on my truck! 😆
Mazda B2000
Ypu are an amazing teacher, im changing my bushings on 08 dodge nitro, cant find a video to GUIDE me but will see how ut looks FIRST, thanks Chris 🤙