How to use RTV and properly make a gasket

Learn how to use RTV to make a rear differential gasket, waterpump gasket, oil pan gasket, thermostat gasket, valve cover gasket, or whatever needs a gasket but you cant find a gasket. Using this method will help make sure you seal whatever you are working on, properly. If you dont use the RTV gasket maker correctly then you can get a leak and all that hard work was for nothing.

Here is the RTV I used: http://www.amazon.com/gp/product/B000FW2NB2/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000FW2NB2&linkCode=as2&tag=chri0e2-20&linkId=ZNK4MMBHUJ45JGCS

**If the video was helpful, remember to give it a “thumbs up” and consider subscribing. New videos every Thursday**

-Website: https://www.ChrisFixed.com
-Facebook: https://www.facebook.com/chrisfix8
-Twitter: https://twitter.com/ChrisFixed
-Instagram: https://instagram.com/chrisfixit
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7
-YouTube Channel: https://www.youtube.com/ChrisFix

Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

24 thoughts on “How to use RTV and properly make a gasket

  1. RTV under pressure, Adjust curing time, – I'm using it for a swimming pool multiway valve, ive done this before but this time I am leaving it over night (say 12 hours) after just hand tightening it, I am not sure if the RTV gets tacky more slowly inside and last time I did this I noticed a minor leak, so this time I think as the pool multiport valve gets a LOT of water pressure when operating I really want the RTV to be a little more cured before I tighten to final torque, just a thought as I dont want liquid RTV uncured belowing back out and up the bolt holes etc. The valve design (Espana 6 port) is shit anyway and no intermediate gasket. RTV seems fine. I am using a Thai branded equivalent. as I am in Thailand.

  2. How to use RTV gasket maker :
    Step one – don't use it
    Step two – get a gasket and do the job correctly

    Seriously this shit has no place in cars, it's just bad

Comments are closed.