How to Fix Your License Plate Lights

How to diagnose and fix a blown out license plate light. The bulb in this truck was visually burnt out, but that doesn’t always happen. Sometimes the light looks fine and really needs to be tested with a multimeter. If the light is not blown out then you have to see if there is current getting to the light socket.

Products Used:
Multimeter: https://amzn.to/39e5uiH
License Plate Lights: https://amzn.to/38azlZd

**If the video helped, please give it a “thumbs up” and consider subscribing.
Leave any questions or comments below and I will answer them as well.**

→ As an Amazon Associate I earn from qualifying purchases.
→ Become a ChrisFix Subscriber: http://www.youtube.com/subscription_c…
→ Instagram: https://www.instagram.com/chrisfixit
→ Facebook: https://www.facebook.com/chrisfix8
→ Website: http://www.ChrisFixed.com
→ My Channel Home Page: https://www.youtube.com/ChrisFix

Disclaimer:
Due to factors beyond the control of ChrisFix, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ChrisFix recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ChrisFix.

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

38 thoughts on “How to Fix Your License Plate Lights

  1. 2012: so we are gonna…
    2021: HEY GUSY CHRISFIX HERE!!!!!
    2050: hey guys, Chris here, *turns camera to his face*
    me: kids have easy lives, no waiting for face reveals.

  2. Old vid I know but I was always taught to use something to measure the oil that came out, easiest is a pan with some sort of measurement on the side. Then when you're adding the oil back you add back the same amount, (provided it wasn''t overfilled in the first place), this gives you a good place to start and helps prevent overfilling if you're a newbie.

  3. What do I do if the cable is rusted out? I have a 2017 Acadia Denali and the license plate light had water in it and now the cable is rusted

  4. why do license plate lights always get that black before they burn out and all other lights on my car not and burn out way earlier

  5. Hi Chris, the owners manual of my car doesn't say it have a fuse for the license plates lights. It only shows the fuses of the other lights. Where could this be? I'm sure it should have a fuse somewhere in the fuse box.

  6. Hey Chrisfix, what do you think of LED license plate frames? My old lights for my truck are burnt out and the sockets are not sitting where they're suppose to be. Wanted to go to the aftermarket path with a LED license plate frame.

  7. My car comes with plastic light lenses.
    Do you know if it is possible to get a bigger license plate lense?
    I have some white led's that are a little longer than the original bulbs and it quite wont fit back with the plastic lense….

  8. Yea, just discovered yesterday that both my licence plate bulbs were not working on my Camry. pulled out the bulbs and found they'd both blown. Decided to upgrade and replace them with LEDs. And shit their are a lot brighter lol.

  9. thanks a lot for this old video, I Wonder do you have one video with an explain how to level your mean or front lights, also I have a Brazilian made VW, which one uses a H1 and H4 halogen bulbs light, I consider replace them for led, can you recommended any model or trademark of led light to replace halogen, thanks in advance, Greetings from Mexico

  10. how to fix how to fix my Chevy Blazer 2007 Light Side switch him I put new ones but they still don't go on how can I fix that

  11. HINT: If light(s) is not working – 1.check light as shown 2. if bad replace 3. if still not working then do what this video shows how to do. Note: DO NOT EAT OLD / BAD BULBS….

    To be honest here, because things change all the time I came here to make sure I knew what I was doing and after the 1st few seconds I had my answer on how to take the bulbs out.. The video was a big help but gave me a laugh because I could just see someone just needing a light and going through all that for nothing. LMFAO BTW – my wife says I'm a smart ass! Anybody agree why her on that? 🙂

  12. And what do you do if there's no power going to the bulbs? 🙁 I changed both of mine and still have a malfunction warning on them

  13. Chris, I changed both license plate bulbs on my 2006 Toyota Tacoma. I checked to see that they worked then screwed is back on. Problem was, I saw a short (guess I should have turned off power when screwing it down). Now neither one works. What fuse would that be? Where is it located? Thanks for all your help!

Comments are closed.