PROJECT SKYLINE V2 COMMENCES – CD Trans & Manifold Plans

The second rendition of the skyline is going to be better than ever – I am so excited!!!!
NEW S15 MERCH AVAILABLE NOW – http://LZMFG.com
Use “S15” for 10% off orders over $50 TODAY ONLY.

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

36 thoughts on “PROJECT SKYLINE V2 COMMENCES – CD Trans & Manifold Plans

  1. Hey Adam just a heads up:
    Wearelikewise says on their site their shifters aren't meant for racing, "show only" so be careful…

  2. Put a tilton, or clutch masters adjustable clutch dampner on the line. makes it engage softer . good for the clutch, the drivetrain, and thrust bearings.

  3. Subliminal messages?

    On these bolts I am going to be using Permatex Red threadlocker which is a high strength one, and then we are going to torque these to 22 ft-lbs.

    On these bolts I am going to be using Permatex Red threadlocker which is a high strength one, and then we are going to torque these to 22 ft-lbs.

    On these bolts I am going to be using Permatex Red threadlocker which is a high strength one, and then we are going to torque these to 22 ft-lbs.

    On these bolts I am going to be using Permatex Red threadlocker which is a high strength one, and then we are going to torque these to 22 ft-lbs.

  4. My CD grinds a little going into 3rd but only if I'm above 4k rpm. I live in the midwest & I want to buy another one but idk if there weren't many 6spd 350/370zs sold in my area because they are near impossible to source for a reasonable price. How do i reach the Florida z plug? I would drive down if i could grab a trans & a couple other parts while I'm there.
    Oh, what's with the ls, jdm boi? & the new exhaust mani on the r32 is sick. How did you do the camo? That can't be powder coat is it?

Comments are closed.