Taking the Turbo off my Race Car

Had to take the turbo off to run a full exhaust in hopes of passing emissions so I can re register the car. While the turbo is off I will be modifying some other things as well.

Stickers –
http://boostedboiz.bigcartel.com/

Insta – Boostedboiz

Want to send us something?
Boostedboiz
PO Box 1357
Loveland, CO 80539

Intro song –
Wontolla, Kasger & Limitless – Miles Away [NCS Release] https://www.youtube.com/watch?v=aCyQu00rZrM z

Kasger
– SoundCloud https://soundcloud.com/kaspergerlif
– Facebook https://www.facebook.com/Kasger
– Twitter https://twitter.com/Kasger

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

45 thoughts on “Taking the Turbo off my Race Car

  1. Emissions suck. Even with a big turbo and a gnarly fuel system and a straight pipe your car will produce less emissions and poison that all the government buses and trains and lets not forget the depleted uranium they fire all over the place along with ballistics. But hey priorities man no hood exhausts or turbos on hondas!. The worlds fucked

  2. In Indiana we don’t have emission tests . I’m lucky cuz I don’t have to do all that shit every time there is emission tests

  3. Hey mr boosted boiz can u use any size turbo ln a 2 l engine i have a mitsubishi galant i thought maby i should build into a turbo car and i have a broken volvo whit a turbo on it that i thaight of using it is a 1.9 engine

  4. The trick I use to get my stuff to pass so easy is alcohol. The 91 from Walmart the big bottle dump half in and fill your tank u will pass never hurt my cars or trucks pass like it ant running almost old guy told me works and cheap

  5. Hey man that gtx35, do you not run coolant lines? I just bought a gtx30 for my z6 and was going to buy the B&R coolant like kit but not sure if I "need" coolant lines for the turbo

  6. your sandwich plate suffered thread galling from aluminum to aluminum. lots of never sieze or teflon tape will prevent that on the new one. .. or switch to brass fitting threaded into aluminum. tought to gall brass.

  7. I recently moved to the state of Colorado from Florida where we dont have emissions testing My EK hatch currently has an OBD1 motor in it and ECU I have the turbo off of it And it still will not pass any suggestions?

  8. You should look into fixing those control arm bushings, or tie rod ends, that wheel is about to fall off or something is going to break.. Watch the passenger front at time marking 2:38, you can see it suck in as he moved. Good luck have fun!

Comments are closed.