Posted in Cars Community

SR20 Update & Tinkering with the 350Z

   May 21, 2021  43 Comments on SR20 Update & Tinkering with the 350Z

It’s been a pretty un-eventful two days. Was hoping to be spending this time on my SR20, but it’s looking like that’s going to turn into another last minute crunch. Only time will tell. http://LZMFG.com

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)
Website Twitter

43 thoughts on “SR20 Update & Tinkering with the 350Z”

  4. it seems like ur just doing all this for more content and ur really braking my heart with all these drift mods on a Z33, You need to go back to another car Adam Ughhhhhhh!

  9. Replacing axle boots is really easy with a Moose Fastboot expander. You slide the fastboot over the expander hook it up to some air, and you can slip the boot right over the outer joint. I do it all the time on 4wheelers and side-by-sides. I don't see why it wouldn't work for cars as long as they make fastboots big enough for them.

  12. HEY Adam lz.. Half this video was nice unfortunately u did too much simulator stuff and I got bored and clicked off, which I Dont usually do… I prefer real life drifting.. 👍 😊 ✌ 👌

  16. For your windshield take a high speed buffer and a heavy cut rubbing compound and fast orange hand cream with pumas. Has to have pumas. Mix 75% hand cream 25% compound. Use the buffer with high cut pad and buff the paste fast to creat some heat. It takes a while but will get them all out. Then polish with normal wax or finishing polish.

  18. I think I was one of those that mentioned Fanatics for your sim racing gear. Now you should be looking into a 5.1 Buttkicker setup, were you add a each buttkicker to the 4 corners of the sim to simulate the tires going over bumps or the apex. Again, check out Barnacules simulator setup and also the video he made about the buttkickers and amp that he hasn't exactly finished yet. It's would be a good watch but keep in mind if you do watch he is a nerd and he calls his channel NerdGasm. No one is going to hate you for checking out a nerds channel to gather information 🙂 lol

  19. You should go ask safelite what they recommend. You can try polish that windshield, but it takes a long long time and it looks s*it after that.

  20. Adam you should get one of thos 34" 21:9 ultra wide monitors or if you're feeling extra baller then the samsung 49" 32:9 super ultra wide monitors for your sim rig so you still gwt a nice wide field of view but no bezels

  21. This is my favourite video to date, you discuss the simulator and work on it – currently I'm working on mine so it's relatable, you got a 7 star Dragon Ball (assuming from Amazon) which I thought about getting like last week while I was looking for knobs, and of course the car tinkering. Love it man, been following for over a year steady now and I'm always satisfied after watching. Thank you!

  22. Build a proper sr20 even though it will take time you have your 350z to drift while building a proper setup with not rushing it

  33. To replace a boot is easy! To simply heat it up a little with an hair dryer helps a lot. And there is a tool for it that spreads it open.

  36. Wicked Adam! Super cool your first precious cargo is chilling with someone from Guam! Being from Guam and being huge fan of your vids, made me and my sons day! Keep it up man, your vids start are day off correct!

  40. lol "design a rig to get practice working on a car" or just spend the money that a rig cost on a car…. these setups are not cheap and the ones that are suck.

Comments are closed.