26 thoughts on “1000Hp Prelude Traps Over 150mph With Only Half Throttle!”
Boosted boizz h2b prelude 🙊🙊
Bro before you ripp it try run some free run firstt..
Bet the oil is to thick and backing up in the pump at high rpm
turned down and only half throttle
The Lude has proven to be a worthy investment. It make power without effort and is violent up high. H to the 🌎!!!!
get an external oil pump bro 🖒
Damn oil pumps
The lude looks terrifying to drive lol.
What about a dry dump oil pump?
Motion Race/Cleetus McFarland throttle body lol
Keep up the good work.
Is that dent by the door handle new ?
Is there a way to add a check valve so when the oil pressure surges it has somewhere to go?
Kyle needs to move back screw Florida
11:55 my evil giggle came out LMAO . oh boy lets see!
The oil pump started going when they put the timing belt tensioner in the front
10 second pass with 50% throttle = 5 second pass when you get 100% throttle….I did that math in my head
Go dry sump on that thing and be done with it
Need to just get a dry sump setup for the prelude.
@boostedboiz Its not a boost problem at 13:38 The clutch is not holding good enough when you get to second gear because you´re stepping on it for too long right before launch, it gets kinda stuck. Reduce rev time at launch to get a first to second gear smooth shift on high rpm and full boost.
It's weird that it just started after you had made plenty of passes, before. The block may be flexing, or has flexed through the main journals. ARP main studs and have the block main journals line honed. Then you'll know that the crank is in there straight. Have the setup fully balanced also, that will knock down the vibrations.
Someone needs ta donate some axels to this car
Need to run external oil pump system on that girl
You checked your engin mounts in the prelude? If you still on rubber ones the engin could be twisting with that much power and causing huge stress on anything attached like mechanical pumps etc…
Not having the best of weeks at all ,fuck im glad i can retreat to the comforts of watching you guys do what yall do best keep it up 💯 love the content as always 👊🖖
Okay Kyle the next time you head back down Colorado this is your checklist for the Lude. Billet oil pump, DSS 5.9 axles , weight plate and turn up the boost on it aka the moon tune and break that record
Be sure to subscribe! ► https://www.youtube.com/boostedboiz Facebook ► https://www.facebook.com/BoostedBoiz-1696272047113834/ Instagram ► https://www.instagram.com/boostedboiz/ Personal Instas: Kyle ► https://www.instagram.com/boostedboikyle/ Jeremy ► https://www.instagram.com/boostedboijeremy/...
Boosted boizz h2b prelude 🙊🙊
Bro before you ripp it try run some free run firstt..
Bet the oil is to thick and backing up in the pump at high rpm
turned down and only half throttle
The Lude has proven to be a worthy investment. It make power without effort and is violent up high. H to the 🌎!!!!
get an external oil pump bro 🖒
Damn oil pumps
The lude looks terrifying to drive lol.
What about a dry dump oil pump?
Motion Race/Cleetus McFarland throttle body lol
Keep up the good work.
Is that dent by the door handle new ?
Is there a way to add a check valve so when the oil pressure surges it has somewhere to go?
Kyle needs to move back screw Florida
11:55 my evil giggle came out LMAO . oh boy lets see!
The oil pump started going when they put the timing belt tensioner in the front
10 second pass with 50% throttle = 5 second pass when you get 100% throttle….I did that math in my head
Go dry sump on that thing and be done with it
Need to just get a dry sump setup for the prelude.
@boostedboiz Its not a boost problem at 13:38 The clutch is not holding good enough when you get to second gear because you´re stepping on it for too long right before launch, it gets kinda stuck. Reduce rev time at launch to get a first to second gear smooth shift on high rpm and full boost.
It's weird that it just started after you had made plenty of passes, before. The block may be flexing, or has flexed through the main journals. ARP main studs and have the block main journals line honed. Then you'll know that the crank is in there straight. Have the setup fully balanced also, that will knock down the vibrations.
Someone needs ta donate some axels to this car
Need to run external oil pump system on that girl
You checked your engin mounts in the prelude? If you still on rubber ones the engin could be twisting with that much power and causing huge stress on anything attached like mechanical pumps etc…
Not having the best of weeks at all ,fuck im glad i can retreat to the comforts of watching you guys do what yall do best keep it up 💯 love the content as always 👊🖖
Okay Kyle the next time you head back down Colorado this is your checklist for the Lude. Billet oil pump, DSS 5.9 axles , weight plate and turn up the boost on it aka the moon tune and break that record