240sx Update – The Motor is Out… More Power?

My 240 would sit in my garage broken forever if I didn’t get help. Alberto pulled my motor apart and we end up doing way more than just fixing it 😉
New Shirts & Stickers – http://LZBMX.com
https://www.facebook.com/kaizenperformancecfl

After I figured out I’d need to pull the motor apart to find the lost shim, I got super bummed. I have so little time with school/riding/business/wedding planning that I knew it would take FOREVER to try to do it myself. Luckily Marco’s friend Alberto has a shop and builds FD-spec drift cars. I brought it to him so he could get it back up to par so I could focus on what’s most important right now and still be able to drive this summer! I’ve actually had a few nights where I was able to stop by so I could learn a few things and help Alberto out- super fun!
http://facebook.com/adam.lz.1

http://instagram.com/adam_LZ
http://instagram.com/taylordrifts
http://instagram.com/drifthappy
http://instagram.com/kelseyrowlings
http://instagram.com/kaizenperformanceinc
Snapchat – Adam_LZ

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

45 thoughts on “240sx Update – The Motor is Out… More Power?

  1. This version of Alberto does not have crazy tired eye bags under his eyes compared to 2019 Alberto!…LoL…
    Wonder if Adam was the cause of those haha!

  2. Texas Roadhouse is so good stack😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😃😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😽😽😽😽👽😽😽😽😽😽🙈🙈🙈🙈🙈🙈🙈🙈🙈🙈😿😿😿😿😿😿😿😿😿😿😿😿😿😿😿💏💏💏💏💏💏💏💏💏💏💏💏💏💏💔💔💔💔💔💔💔💔💔💔💔💝💔💦💦💦💦💦💦💦💦💦💦💦💦💦🚅🚅🚅🚅🚅🚋🚅🚅🚅🚅🚅🚅🚅🚅🚅🚅🚅🚅🚅💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩😛😛😛😛😛😛😛😛😛😛

  3. There is happening so much to your 240!! Of course I haven't catched up with your latest videos, but I very much like where your project is going!!

  4. FYI the bleeder valve on a caliper should always be on the top end. The whole purpose is to bleed out air in the caliper, which will be sitting at the top end of the passageways inside the caliper, not the bottom. if your caliper has a bleeder valve on the bottom side of the caliper, your caliper is on the wrong side of your car.

  5. Hey Adam, I noticed you have Innovate Motorsports products in your 240 now. I am trying to sell some of my Innovate stuff from my race car. (As shown in my profile pic) HMU if you are more interested and i can give you more details into what I have. Thanks!

Comments are closed.