‘It’s going to take a while for the reopening to have an (economic) impact’: Kudlow | ABC News

George Stephanopoulos interviews Larry Kudlow, director of the U.S. National Economic Council, on “This Week.”

SUBSCRIBE to ABC NEWS: https://bit.ly/2vZb6yP
Watch More on http://abcnews.go.com/
LIKE ABC News on FACEBOOK
https://www.facebook.com/abcnews
FOLLOW ABC News on TWITTER:

GOOD MORNING AMERICA’S HOMEPAGE:
https://www.goodmorningamerica.com/

#ABCNews #ThisWeek #NationalEconomicCouncil #Reopen

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

23 thoughts on “‘It’s going to take a while for the reopening to have an (economic) impact’: Kudlow | ABC News

  1. 9 TRILLION dollars to 175 MILLION individuals???? $51,000 per individual???How can we have 175M of a population of 330M receiving that??? Get real. DRAIN THE SWAMP!

  2. Wall Street is temporarily supported by amateurs. The smart money has already left the building. Block your ears for imminent almighty crash.

  3. I got my check today, yahoo. Not a record theres just a bad virus and we have a great PRESIDENT will be great with recovery 2.0. The shut down is not caused by the "ConvinanceVirus".

  4. I'm tired of the predicting. There are no crystal balls. No one knows how long it will take for the economy to fully come back, but it will because that's what it does. One day it will crash again. That's what it does. Hopefully, the people in food lines have learned the risks of living paycheck to paycheck while buy the newest Iphone on a monthly plan. When I started working in the 80's the advice was to have 3 months of living expenses in savings. While that was extremely hard to do, the thought that I needed it kept my spending in check.

  5. Masks help stop spread. We need a TPR mask which I want to do please let me do it. Im currently developing a new product in the midst of this coronavirus outbreak pandemic. My product in the works is a clear rubber mask to use coffee filters and paper towels that may prevent spread of covid until pandemic is over or until they have the vaccine complete and distributed by the millions! Something that is feasible and can work and is engineered to solve problems of nearly all other masks which failed to protect people from getting Covid-19 lung infection and enable them to leave their homes whenever they want. I want to use my prototyping/manufacturing/rubber and plastics development and production background and skills already acquired which qualify me to fast track this mask into completion and if necessary manufacture it all by myself I just need funding (donations since I couldn't get any loan). If I can just get donations then it will become available soon and will help save lives making a TPR mask to protect lungs from getting covid-19 infection from the novel coronavirus Sars-Cov-2 because it will protect lungs better than most any known other masks besides very high tech gas masks but they are expensive and could not meet demand to millions of people while mine can and be just as effective! Nurses should have them and so should everyone because it's a clear latex free rubber material that can be washed with soap and water to disinfect and reused many times. Do you want the best rubber mask to prevent from getting covid? I want everybody to have one including workers and nurses and business people and every day people commuting for any reason during this pandemic if they want one. But It's not ready yet and not made I'm developing it and can make it happen with your support (only) through donations!

    https://www.gofundme.com/f/masks-thermoplastic-rubber-covid-protection?utm_source=customer&utm_medium=copy_link&utm_campaign=p_cf+share-flow-1

    Through my go fund me campaign I'm reaching out for support in form of donations of any amount to support my cause and my purpose at this time during this horrible pandemic if funded. The following is my proposed plan to replace the stay at home policy which is not sustainable for everyone to stay home for weeks on end particularly when we lack the income to do that. My plan is intended to serve as an effective defense protection mechanism directly protecting the lungs. Its awesome we have vaccines being formulated and effective treatments which are offensive strategies to fight back and ultimately win against the virus but we NEED solutions now to replace stay at home for greater than 60% of the populous that cannot sustain stay at home. Stay at home was smart and effective to flatten the curve. Let's keep the curve as flattened as possible by minimizing risk by making my mask offering greater protection than other masks and a lot more feasible in several ways to continue its use. And if my mask is funded by your donations plus my fast tracking and hard work and strategies I believe it will become my vision here because my thermoplastic rubber mask will be widely available and widely protecting people. Other masks aren't sealed or aren't sealed good enough and I've never seen even one that had a rubber flange of 1cm or 3/8 inches to sit flat all around it against face and nose. Whether a face mask has a filter or not it won't matter if air is allowed to get past the edges where its worn. And it will unless its a good seal such as it will be with my thermoplastic rubber mask with a flat flange all around it and force all air through its filtered ports.

    My vision is people wearing my mask in high numbers going out and about with significantly lowered fears or concerns and able to run businesses as such and wearing a cloth mask or other commonly worn masks overtop of my mask just for the increased protection and to keep the filters from getting contaminated faster. I want to say also that its very good for people to wear some type of mask at least. But they also should not be shot nor arrested if they don't want to wear a mask. It is their right within the land of the free not to want to wear a mask however because of how its spread a mask can make it much safer and prevent or at least limit the amount of droplets inhaled even with a simple bandana. If you want to step it up my TPR mask worn under another mask would make for much higher safety and much lowered chance of breathing in air from infected hosts. It is intelligent to wear a mask during this time until the number of cases and deaths has dropped to extremely low and safe levels throughout this country just like it is to wear a helmet when riding a motorcycle. A mask of most any kind is good and will protect to at least some level however if you want the best protection either get a gas mask or fund my tpr mask so I can make it happen. My tpr mask is much lighter weight believe me than a gas mask those things are bulky and have heavy filters and they pull hair and hurt to wear them. And there's no way any given mask could keep up with demand. However mine could if my vision is shared with thousands of people and millions of people. It's not all about making money for me I only want to maintain 20% gratuity for my mask in case any manufacturer is interested in contracting with me. I don't yet have my high quality prototype because I need donations at least $8,000 would be great to get the materials I need and to pay for business expenses to get started. I was unable to get the government loan to help me and unable to get other loans so I need donations.

    What we need is my clear thermoplastic rubber mask for greater protection against getting Covid-19 infection in the lungs (potentially much greater protection than most other masks). Because unlike a gas mask it will not require any special filters and will still be air tight and utilize 100% of the homemade filtering resolving the issues with nearly all other masks including medical masks which don't actually seal 100% though if worn tightly and good fit medical masks may seal decently but honestly probably not 100% by design and by material unfortunately thus you have nurses and highly important people that have caught virus and died. A face shield like I wore when I was doing grinding offers only limited protection since its not sealed from the bottom anywhere. The mask I have in progress isn't available yet and should be the answer the world needs I believe. If or when available should l get the donations to do it people will wear my TPR mask underneath their other mask that they've been wearing. It will have a flat flange about 1cm all around the mask to seal against the face nose cheeks and chin and go just under chin and have 7 to 9 ports which are on the cheeks and at least one port on the chin.

    The filter media to be 1 strip of cut paper towel and 1 strip of cut coffee filter you can do with scissors will go in between the rubber insert of mask and each port will have sealing rings between TPR inner mask to ensure each port is sealed well onto filter media besides rubber pressed against itself for sealing as well resulting in very reliable forced filtration for cheap and eliminate any needed proprietary filter that would be of extremely high demand anyway. It's going to be a great answer to keep people more safe and secure and able to go out and about with their lives while still wearing a mask but a much safer mask. Doing so should become a solution to keep people from getting the virus and allow us to go outside and live our lives without getting sick and should greatly reduce or eliminate the transmission of this virus being breathed in and hopefully allow us to be able to live lives more normally with greater security and greater protection.

    While other masks are not sealed this one will have a flat flange the seals against the face and forces air to go through the ported filters on cheeks and on chin and nowhere else while cloth masks and surgical masks are not sealed against the face and allow air to get through. We need a much safer mask that can be disinfected by washing it with soap and water since its waterproof clear SEBS rubber and I have the idea and the answer and development in progress and planned and just need donations to continue now. Watch my youtube video and please donate so I can fast track its completion! My mask is going to be a new not yet introduced tpr mask with ported holes on the cheeks and chin which don't touch mouth or nose.

    Please anyone economically able to help provide donations directly to ME to make my thermoplastic rubber mask to make it available to you also and to help stop spread of covid-19 coronavirus and offer better protection do so. I need to raise funds anywhere from 8,000 minimum to get started to max of 40,000 USD is where I have decided to cap it at for my Go Fund Me page. If interested please view my one and only video posted on youtube on my channel and view it with the CC enabled which says more. You can donate to my paypal email directly dgibbie at gmail dot com said in my only vid and its description on my channel or through here https://www.gofundme.com/f/masks-thermoplastic-rubber-covid-protection?utm_source=customer&utm_medium=copy_link&utm_campaign=p_cf+share-flow-1​

  6. Only a president as incompetent as Trump would hire an mediocre character like this guy Larry Kudlow to be an economic advisor

  7. People are being ignorant they want the country locked down but the Government is not going to be giving anymore money an eventually banks an money loan services are going to stop giving money loans people can be as one sided about this as they want but businesses are going to have to start reopening even though alot of people don't want theme to or there's going to be mass amount of American people with debt because of it because an most of America besides rich people don't run on an endless supply of money

  8. I could be a media anchor..!!!…..I can say "will get worse "…."we have to wait and see" …."vaccine may be game changer "…..and finally …."we're in this together "….I missed my calling…

Comments are closed.