Mid Engine 67 Ford Mustang Fastback Pt. 3 – Fitting The Body Properly

In todays episode we’re fitting up the body and getting started on the roll cage!

❱ Shop – http://bisforbuild.com/
❱ Patreon – http://www.patreon.com/user?u=3364742
❱ Facebook – http://facebook.com/bisforbuild
❱ Instagram – http://instagram.com/bisforbuild
❱ Twitch – https://www.twitch.tv/bisforbuild

Music:
Fareoh – Cloud Ten

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

28 thoughts on “Mid Engine 67 Ford Mustang Fastback Pt. 3 – Fitting The Body Properly

  1. I’m only 7 minutes in and I’m pretty sure ur messing with my head on the fuel tank placement lol. Put it in the trunk if needed you can do two smaller tanks on both sides of the truck for room

  2. You could place the fuel cell in the area where the Yellow label below the steering column. (remove the top aluminum and movie decal panel place the fuel cell between the rails and control arms.)

  3. Put the fuel cell in the trunk. Typical spot race cars fuel cells go.havving it in the passenger area is a bad idea if you crash roll over or t bones it can rupture right underneath you and go on fire

  4. I'm sure its way too late, but i would be inclined to move the rear wheels forward by making new control arms. Could also do that with the front. As long as the CVs aren't too crazy of an angle it might buy you a few inches.

  5. Those welds that Oscar lays down are GOD tier. Question: why cant you place the fuel cell in the trunk as it looks like there is at least 3 feet of space between the chassis and the tail light cowl?

Comments are closed.