We Had To Take The K-Swapped Jet Boat Back Apart

35 thoughts on “We Had To Take The K-Swapped Jet Boat Back Apart”

1. What are the top speeds of Cleetus's boat and the rest of his friends boats for speed comparison?

2. Diesel content is about as bad as the jet boat content 💩👎

3. Is it time for a 3rd amigo or to make the boosted bois a squad? Sounds like the projects are overwhelming the channel a lil bit. Would love to see the channel grow I think adding another quality member to the team would help the channel take that next step and grow.

4. Maybe try getting some shipping containers to store projects in?

5. Until turbo system is put in place you could always put some ballast on the passenger side to level it out.

6. Nitrous not propane? On a diesel

7. Let's not pretend it's only because it's easier to fuel up if you move it

8. God his truck makes me wish I was able to finish my 94 4×4 f250 ex cab short bed turbo 460 truck finished. But no time. Money tight. But love seeing how the truck is coming along.

9. keep it pushing bro love to see it.

10. could have just put a wall between them with some kind of insulation

11. love the Race Truck 🙂

12. K swap the the lawn mower. Turbo johndeer

13. K swap John 🦌

14. Kswap the mower

15. Small thing when you push the throttle all the way up on the lawnmower you were actually putting it in choke. Full throttle is actually just a notch below.

16. Why would you NOT put a dry sump in?

17. For weight distribution, just buy some lead bags that we use for wakeboarding. Keep them at the house and whenever you’re going out solo, bring ‘em with you. You can get four 50 lb lead bags for relatively cheap.

18. Supercharge it!

19. Turbo the John deer

20. Steering on the other side would solve all problems

21. That was seriously dumb fuel close to the exhaust like wow

22. You should leave the other cap for the water box filler

23. When you connect battery wires you can get a spark. So is it wise for it to be next to fuel cell? If it's a totally sealed unit, and it's not near any inlets/outlets that can vent fumes it might be ok, but that spark could easily catch any built up fumes alight.

24. Kyle are you looking to buy more waggo rear diffs ?? Or other waggo parts ??

25. What is up Boostedboiz for ever 👍

26. can maybe reuse the refill hole on the original side for a dump or exhaust

27. That lawnmower needs a k swap

28. We wanna see an awd dyno number. We all know it can make 1000+ fwd.

29. Run 2 batteries on a switch

30. You should run the fuel cell in the front of the boat make a custom cell keeps some weight up front and center just a food for thought good luck with the build looking good guys – Corey checking from Connecticut cheers

31. While you had the mower in the garage you should have rotary swapped it. Get a small rotary like Build Break Repeat has.

32. use a lithium battery to save weight

33. Once you add turbo kit & air/water intercooler on the stbd side, the weight balance will be great. That small flat hull will be just fine. Love it guys 👌🏼👌🏼

34. Excited for the build! But don’t forget, more horsepower isn’t going to give you more top speed.. only one gear on a jet boat!

35. turbo and water to air intercooler would be your answer for that weight balance

Comments are closed.