Fix a Door that won’t Lock or Unlock

Learn how to fix a door that wont lock or unlock by replacing a door lock actuator.
#shorts

source

Author: phillyfinestnews

ANGELHOUSE © 2009 - 2020 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

37 thoughts on “Fix a Door that won’t Lock or Unlock

  1. Very good video keep it up!! Could you please do a video on how to find and fix an evap leak ? I have an evap code on my vehicle and I can't find where the leak comes from and I've already replaced the gas cap…

  2. Sometimes, it's not always the actuator. Either the wiring could be bad or the rods could of got broke/unhooked somehow. But great video👍

  3. Reality: Door won't lock
    Me: many colorful metaphors
    Curse and grumble fighting it out of the door.
    Cursing the automakers for placing it back there.
    Side panel doesn't go back on properly so it rattles when I drive.
    I end up cranking up the radio to drown out the rattle.
    LOL Thanks for the video

  4. In the case of my car, the driver side door lock actuator was mounted into place with a metal bracket that's riveted to the door.

    The rivet broke, releasing the bracket holding the lock actuator in place, so the actuator works but just flops around and can't perform its function.

    Easy fix, of course: remount the actuator bracket with a screw. Of course, the inner door panel and associated parts had to be taken out of the way to do the job.

  5. The first thing you should actually do is make sure you switch is a connected before you replace anything. Not trying to be a funny person here but I’m just saying that’s the first thing you look for before you change anything

  6. Hey Chris fix that jeep is nice wow u sure have taste for cars just wanted to say that and ur vids are very helpful and worth watching every single time glad u exist 😀

Comments are closed.