Join the concrete crew in Prentice Wisconsin which is basically in the boonies of the north woods. We were able to set up a building slab and get it completely ready for concrete. Unfortunately I had to cancel the pour the next day due to rain but we are going to get it done no matter what! Enjoy
You gotta test that tie gun on a hotdog or something, I need to see it
Good work cuz keep it up
Can you guys fly out to Massachusetts and do my 10×12 driveway?
opps 18 july not 17th i made an error sorry ryan.
oh by the way it is going to happen today about 4pm 17th july this year.
Ryan here in the UK we have a warning that we can expect to have lightning thunder and 4 inches of rain in three minuets . may i borrow one of your boats or rent it lol that is a lot of rain. monsson weather comeing. i do not think that i will water all the weeds around here where i live lol. any way work hard be safe and be happy see yah later.
Ryan's like kid in a candy store with thay trying gun
Why you didn't put on that trenching bucket and dig with the excavator from outside the form. 🤔 Oh well
What did this guy do for a living?
Frank is the type of friend that is nice to everyone no matter who it is 😂
Frank's got a lot of easy money 😅😅
Hand controls are way easier less movment from the operator and when you hit a bump and you try to put your feet down to support you from moving you dont push on the foot controls and posibly mess somthing up thats the risk with foot controls time is money and foot controls arent speedy
We had a newholland mh plus in the early days, electric controls too. not good for smooth work, hydraulic control works better for me
Rewashing old videos because Ryan/Autumn is taking a long needed upload break during world of concrete
Call BIG RAy
Binge watching from Cincinnati Ohio ðŸ™ðŸ½ðŸ™ðŸ½ðŸ‡ºðŸ‡¸ðŸ‡ºðŸ‡¸ðŸ¦…🦅ðŸ‘🤪🤪🤪🤪🤪
So jealous
22:40 had to mute my phone the sound of the foam just shot cold chills all over my body 😂
Has a 21 year old it brothers me that he needs to use his hands to move the machine my old heads taught me how to drive with my feet and operate at the same time.
Be careful with the string… Dude just untie it till u finish compacting then put it back, and yes it wont move😅
Kia Ora & Good Morning from Caribbean Drive, Unsworth Heights, North Shore, Auckland, New Zealand … Another Great Video Bro.
I would hate to work for you.
EASY MONEY!!
Sany is ok. But we just got a 2024 cat 304 loaded and it's way nicer.
First thing out of rays mouth..10 bucks..brrqkfast was 10 bucks..so what
since I've been in industry people would look down on not running machines at full throttle, I don't know but I've always been taught to run a machine full throttle unless you're loading or unloading the machine. That also maybe be why you have a delay in the controls I don't know.
ol boy got a really really nice beard
You don’t have to twist it to feed the wire through
Anybody who would rather have foot controls than joysticks is a little crazy😂😂
lol Ryan you all are like doing a science project with the tye gun lol 😂 it’s not hard to reload it or fix the jam lol 😂
lol and you can load it any way lol it don’t have to be perfect runs lol just cut them the same length and slide them up inside the gun lol 😂 it’s not gota be perfect lol
It’s funny tho seeing you so happy scored with the rebar the gun lol 😂 we use them every single day at my job to tie rebar and the blinking light beeping means either a jam or out of tye wire
We use th e same exact kind to
Ryan we use them rebar the guns every day at my job lol I wish I was there to help you learn to load it
You don’t need to spin it boss man. Just feed both wires in.
Whenever we do a trench drain like this, we get it set and use a few bags of u-mix to get it secure for when we pour the floor. Makes life a lot easier,
What’s the foam for
dont some of the joystick steers have a was to adjust that deadzone that is awkward. may just need to be changed since it's such a fresh rig.
We have a 24ft strike off!!
New Holland hand and foot controls Deff the best!! Easy Money !! Trying to watch as many videos as possible!!
What’s is the foam for ?
11:20 Sany’s are garbage
Be careful if you buy a used Sany machine. They have fine print in the warranty paperwork that if it was ever in a rental fleet the warranty is void. C&C equipment did a couple video about a machine they bought at auction and resold. Turned into a bad deal for them.
you dont need to spend all that time retwisting it. you can just take it out and put it in right away and restart it. You might have to "Wiggle" the wire to feed it in. There is a spot in there where it feels like the wire wont feed, but it will eventually
Try using klein pliers and a wire reel. Much faster for tying rebar
Yo frank is a cool guy I did a job for a guy and we didn’t have our machine and the guy has a John deere and didn’t let us use it glad frank is cool
So with the Twin Tier tie guns we have two of them at our work and when it beeps at you most of the time it is from pressing the lower guard against the rebar tripping the sensor they make the four inch tier which on larger amounts of bat to tie around normally beep without gettin just the right angle without tripping the sensor they make a six inch which ties around more, when you load a new spool of tie wire you have to hand feed wire into it a good ways then release the button and turn it on pointed down and it will cut and drop the twisted wire tip, if you ever deal with it getting knotted up inside or jammed up you turn it off then point it down and turn it back on and it will cut and release the knot @Victory Outdoor Services
I dont care much for sany equipment they try to compete with catepillar but its all made in china and dont last long
Nice videos I been watching them this last 2 days in a row can wait to star the new year I’m also a finisher in the central coast California your videos remind me when I live in North Carolina when I was young good videos ðŸ‘