How to Install Replace Wiper Transmission 1988-98 Chevy GMC 1500 2500 Tahoe Suburban



https://www.1aauto.com/1A/WindshieldWiperLinkRods/Chevy/Tahoe/1AWWS00049?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=fR8esYA9H1o

In this video, 1A Auto shows you how to repair, install, fix, change or replace a broken, bent, damaged, failing or squeaking windshield wiper transmission. This video is applicable to the 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, Chevy or GMC, Tahoe, Suburban, C1500, C2500, K1500, or K2500 pickup trucks.

🔧 Instructions:

1. Removing the Hood Cowl 0:38
2. Removing the Wiper Transmission Linkages 2:25
3. Installing the New Wiper Linkages 3:38
4. Reinstalling the Hood Cowl 6:04

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

source

You May Also Like

About the Author: Rafael

ANGELHOUSE © 2009 - 2018 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

2 Comments

  1. Thanks for posting this.  The video helped a lot. I had know idea how to get access to the transmission.  The wiper arms have to be lifted up before the clip will slide out. I can see this now in your video.  It took me a few minutes to figure this out. There is a big adjustment range (slots) when you tighten the new arms.  You may want to mark the initial wiper position with tape and then test the position of each wiper arm before your fully tighten everything up.  You can slide each transmission arm as needed to set the location of the wiper arm back to the original location.

Comments are closed.