How to Replace Power Window Switch 97-05 Chevy Venture



Buy Now!
New Power Window Switch from 1AAuto.com https://www.1aauto.com/yt/i/1AWES00046?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=2PM20Vq9djs

🔧 List of tools used:
• Flat Blade Screwdriver
• Phillips Head Screwdriver https://www.1aauto.com/yt/i/1AXAA00013?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=2PM20Vq9djs

For More Info or Torque specs visit us at https://www.1aauto.com?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=2PM20Vq9djs

In this video, 1A Auto shows you how to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch. This video is applicable to the 97, 98, and 99 Chevy Venture and 97 to 99 Oldsmobile Silhouette models. Later model Venture and Silhouette and Pontiac Trans Sport and Montana use a different switch however the same basic procedure applies.

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

source

You May Also Like

About the Author: Rafael

ANGELHOUSE © 2009 - 2018 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

13 Comments

  1. If the passenger side window roll down but not up, how do you know if the passenger switch is bad or the driver side master switch is bad? Or both?

  2. If the window doesn't work at all you may want to check the fuse to see if its blown. If the fuse is okay, you may want to test the power to the window motor with a test light or an ohm meter to see if there is power to it, or at what point you loose power in the circuit. Hope this helps you out. Have a great day! 1aauto.com 888-844-3393 FREE SHIPPING in the lower 48 states!

  3. i have the same problem with window not going up but down its not motor and i changed the switch the door harness looks fine heeeeeelpppp

  4. Look to see if there is a blown fuse and replace it with a good fuse. We carry new window switches for many different kinds of vehicles on our website 1aauto.com 888-844-3393

  5. So finding the part was kinda hard with a reasonable price and living in the valley we get a lot of rain. My boss told me I could take the switches out and paper clip the gap to roll up the window, while saying I could blow a fuse… so I'm looking for the 8 pin diagram, manual, etc. of which pin does what so I could roll up the window to unsure I do not get water damage in the passenger seat. Just until I can buy new switches…

  6. @jmcwilliams75 You may want to see if there's power going to and from the switch. Also check the fuses, and you may also want to check the wires that go between the door and the body of the van to see if any of them are frayed or broken.

  7. My driver's side window wouldn't roll back up and it was the first bad snow. I thought I was screwed. I watched this video, didn't need to replace the switch, just had to jiggle some wires around. My window is now up and I won't have to freeze my but off this winter. THANK YOU!!

  8. @pinappleface94 The Grand Prix could be similar to the vehicle that we have shown. The repair process more than likely would not be 100% the same though.

Comments are closed.