Posted in Car Mod

3D PRINTING A MINI LS3 ENGINE! (3D Print At Home For CHEAP)

   May 6, 2021  20 Comments on 3D PRINTING A MINI LS3 ENGINE! (3D Print At Home For CHEAP)

“DO IT FOR DALE” Cleetus/1320Video T-Shirt – https://goo.gl/2jvjJw

Cleetus “Twin Turbskies” T-Shirts – https://goo.gl/TYBLcV

Check out this sick nasty mini Bald Eagle power plant that I 3D printed at home! From what I’ve read this is the best 3D printer for the money. I’m very happy with my results thus far!

Printer – $199 – https://goo.gl/eM4ct3

Filament – $21.60 (varies by color) – https://goo.gl/Kj8Yd9

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)
Website Twitter

20 thoughts on “3D PRINTING A MINI LS3 ENGINE! (3D Print At Home For CHEAP)”

  3. Hey Cleetus! Did you ever continue printing the rest of the parts? Would be a fun throwback video update to even what the current content is today!

  4. Don't waste your time just print retro car parts and sell more worthwhile. Abs parts and sell into your local garage.

  5. Have you seen any engine blocks for a 7M or 2JZ? Been looking but haven’t found one that’s printable like what you did in this video.

  10. I have the same printer, same filament and the same files as you but every time I print the engine block with no supports it fucks up at the over hanging angles.

  14. That's the engine block I designed actually. I put it on GrabCAD along with most of the LS3 rotating assembly. Makerbot contacted me to ask if they could use it but they never told me what they were going to use it for so I'm guessing that's how it ended up on Thingiverse. I have fully detailed heads and valve train that will be done soon and intend to put an entire engine out there eventually. Have an LS3 intake manifold sitting here begging to be modeled. Takes a lot of time to model all of this stuff accurately especially if the parts aren't in front of you to measure. Cool to see this stuff being used out there.

  16. I got my printer and have had some issues with alignment when I download things from thingiverse to cura and print them. I have a mac so I had to download cura off the internet. It didn't have the monoprice mini listed so I had to put the specs in. When I print something it always goes off the print bed and the bed or the extruder tries to go off where it should stay. What am I doing wrong. PLZ HELP!!! 😫😩

  17. If you want a faster print time it will look like the same quality or even better then change your layer hight to .31 it works really well.

Comments are closed.