Budget B series Turbo Build / Pulling the Motor

Insta – Boostedboiz

PFISpeed

Street2track.net

Huxracing.com

Want to send us something?
Boostedboiz
PO Box 1357
Loveland, CO 80539

source

Author: phillyfinestnews

ANGELHOUSE © 2009 - 2020 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

26 thoughts on “Budget B series Turbo Build / Pulling the Motor

  1. Is that just the b20, and we're would be the best place to find one because I've checked on hmotorsonline and the only one available is the b20b crv japan spec long block?

  2. Hey what's up? Do you do swaps on other ppls cars? I'd bring mine to you from mn of you could do a b20 with a cheap turbo can you please get back to me and let me know.thanks and I'm a sub.

  3. Hi, can you pls comment on the suggested B-series lifting points if a Leveller is used in conjunction with the chains? I was thinking to use one 14mm bolt at the intake side and the other on the transmission bracket (below the Vtec Solenoid) ..

  4. Pulling the engine is one thing. Putting it back in is a whole new level. You should make a step-by-step tutorial about that.

  5. Nice now wash your hands good tip talcum powder with water removes grease small amounts and water and work into your hands even gets grease out of your fingerprints that’s generally the main pest that makes your hand look grubby

Comments are closed.