Cab Swapping the Forgotten Freedom Factory Rollback… It’s a DISASTER!!!

49 thoughts on “Cab Swapping the Forgotten Freedom Factory Rollback… It’s a DISASTER!!!”

1. Anyone know how much power these transmissions can hold? Also need to know what the best clutch to run is.

2. Are the gear ratios gonna be the same on the diesel tranny as their are on the 454 tranny?

3. Sam repainting a panel on his old cougar in the background!! He's gonna love that cat

4. Love these long build videos.

5. A vice grip style video with these two would be gold😂

6. I love these videos !!!

7. Fantastic content cleet. Smart move doing it wrong for the lolz

8. THANKS an hour long video hell yeah brother !

9. what is egg doin in the engine bay hah

10. Watching Cleetus & George working on this old square body is way too entertaining 😂

11. I need the clutch pedal setup out of the rusty cab for my C10!

12. Milwalkee Deablo sawzall blades.. They cut hardened bolts nicely! Trust me !

13. You were suppose to feed the strap through the cab with the door open and close the door on the strap

14. Clean the old tow cab up and turn it into a bedroom piece of furniture for Rip to play in OR a computer game similator arcade for freedom factory.

15. I love the shop shennanigans you guys are adding into the videos….It's so familiar to me and makes it even more enjoyable!

16. More of this content!

17. it's a relief to see actual qualified mechanics, with a plan, knowing exactly what they're doing on this channel 😂

18. Can’t go wrong with cleeter, chrome sockets and an impact😂

19. we just need a whole vid of you guys doing commercial shorts

20. Let’s start a movement bring Brent to Florida.

21. @6:43 is that an egg in there?

22. Definitely should have called up @ViceGripGarage for this project.

23. That Sam

24. "Are those the same hands you use to launch RC planes with?" Lol

25. You should redo the front suspension while you have it all apart like that

26. Spray can flames are a must!

27. Watching these two work on something is the best thing I have ever seen😂

28. It always cracks me up when Southern Boys start yakkin' about 'bein' rusty'. Come to MN for a winter and work on cars. I dare ya.

    But yeah, that cab was pretty rotten.

29. You made your life harder by taking the weight with the forklift, if you're pulling upwards on the cab you're adding tension to the bolts.
    The first bolts were easiest because that tension was spready evenly over all 6 bolts, each time you broke one loose the tension is spread over fewer points which increases the tension
    They would have come out easy if you just left it to sit on chassis until the bolts were removed and then lifted it

30. I've just watched " Two goofballs one square cab body" .

31. Man what would we all do without your channel! Love this new cleeter squirrel content 😂

32. Thanks for the laughs fellas.

33. This is the cleanest body swap I've ever seen. Chip Foose ain't got nothing on these 2. 😂

34. I can't tell if you are doing a restoration or a junkyard teardown.

35. as someone that dismantled trucks for a living…. this is hard to watch

36. Use a two post lift and strap the cab down using tie downs, then just drive the frame up under the cab on the lift and lower it down onto the mounts. 23:31

37. Good old redneck Shenanigans. 😂

38. This video had be laughing so much 😂😂😂😂😂😂😂

39. Cleet you're having a girl. Good luck brother. Gonna need a flatbed to haul them boys away.

40. We need weekly cleeter and squirrel 🐿️ videos! This is great content

41. We need a shirt with a battery and a starter that says, "How bout now!?"

42. This is so dam funny the smiles on every one’s faces are priceless

43. I can literally hear that song:
    Time to do some sketchy shi*
    Doo-Dah, Doo-Dah
    Hope I get away with it
    Oh, Doo-Dah-Day😁😁😁

44. i like the use of the forklift to test the tensile strength of everything you forgot to disconnect as opposed to an engine hoist. that's not something you can teach and the sign of a true professional

45. GaDamn what a shenanigans! 😂
    Georges comments are golden!!! 😂😂👌

46. Cleet you know
    Scrapping the old cab puts money in the budget for anything.. maybe even a turbo exaust whistle 😂

47. Love that new engine for the Holden commodore Ute hi from aussie

48. So painful to watch haha. Might be one of the easiest shifters to remove. A quick such on youtube would have saved a lot of nonsense, but I guess that's the point. Looking forward to see what comes together.

49. Open the doors, put the strap thru then shut the doors, Cleet

Comments are closed.