Installing a 1000hp Engine and Sequential Transmission Into The Minivan

source

Author: phillyfinestnews

ANGELHOUSE © 2009 - 2020 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

50 thoughts on “Installing a 1000hp Engine and Sequential Transmission Into The Minivan

  1. would yall consider a consultation like a 30 min phone call or less. I got a 03 odyseyy trying to do a manual swap using the ATC6 trans. thanks

  2. Bumoer to Bumper offers the same service for mixed automotive paints. You can get it in the aerosol, pint, gallon, or 5 gallon if available.

  3. Is it common to drop the engine from the bottoms when working on Honda’s. I am currently doing a motor swap on an 02 accord and pulled it from the top cause of subframe rust and no lift. Just curious, lmk

  4. Not going to lie, it would actually be cool to build the van as more a street sleeper and slap on a turbo that has better low and mid range power and quick spool. This way you can really surprise people on the street with it as opposed to some 1,000hp build where it takes a while to build useable amounts of power for the street. Basically a turbo that can hit around 3,200-3,400rpm all the way through mid range and steady curve to red line.

Comments are closed.