LS Swapped 30yr Old Italian Yacht FINALE!! – ITS FASTER THAN EVER!!!

45 thoughts on “LS Swapped 30yr Old Italian Yacht FINALE!! – ITS FASTER THAN EVER!!!”

1. .

2. Please make sure to run the blowers before you start the engines.

3. B is for Plane on the next one yea? 😉

4. Have to agree that lighter carpet really does make a huge difference

5. Not only cheaper on fuel ⛽ but much dependable.oh yeah hummin Cummins.

6. Change the prop to performance one.

7. nice

8. It would been good if you could have treated all the wood with thompsons water seal.

9. Drop the build asap please😅

10. 🇺🇲✌️👌keep it a cruiser don't push it more .

11. Youre running 2600rpm max, what do your engine produce at those revs? Probably only half of what is stated at peak. I'm assuming this still has the diesel drive train/props? (I don't know boats). I think you need to be looking at how to get your engines to rev.

12. B is for bad mic.👌

13. Oscar man you are a beast. What can't you do? 🙂

14. If you supercharge the engines you might get away with keeping them in.

    Go speak to a boat chandlery about getting new props.

    Also ballast in the rear required.

15. Lift the tabs you dont want the front burried after plane

16. He likes his boat to porpose like a dolphin so when it hits a big wave, he's got a submersible boat.

17. Is there too much prop on the boat?
    Looked like about 2700 rpm at WOT?
    Those LS should spin a bit faster than that. Not necessarily on the rev limiter but should be able to pull 4000-4500 at WOT.
    Which should be closer to the fat part of the torque curve.
    Will be a little slower at marina speeds as well.
    Very nice job.
    Y’all did an outstanding job reviving that old girl

18. B is for Boat should be a second channel

19. Props….

20. Really digging the boat and the b is for boat series.

21. You lost me with the mpg of the diesel vs your gas. If your acquaintance is getting 1 mile per a half gallon wouldnt he get 2 miles per a full gallon? You said hed get 1.3 miles per a whole gallon. Did i miss something? There wAs alot of numbers .

22. have you changed the props after switching from diesel to gasoline? diesel props are bigger and your engines are struggling. you should reach max RPM at WOT. matching props is an art, but basically you want to still get close to max rpm of the engine. also wonder if transmision grear ratio is correct for gasoline engines.

23. I have one of those fireballs in my computer server room, great insurance

24. Great progress! You’ll definitely need very different props. To be honest I’m not sure but you might even need to change the gearing..
    also I wouldn’t repeat the metal brush idea on the non-skid.. There’s some dedicated cleaning products for that purpose 🙂

25. The B is for Boat look awesome. Now it's time for S is for Sound 😀

26. Only thing I would change is to change all leather to brown leather, would of matched with the red and white! And wouldve made it look more italian!!

27. Your props and Transmissions are geared for diesel. You need different pitch props and higher gear ratio on your Transmissions. You should be able to cruise @ 4000 rpm and 35mph. Top out @ 43-45.

28. Have loved this project. I have no interest in yachts but this has been mega. Well done to you all.

29. Wrong props. The engines should be able to make their rpm at least 4500 rpm smaller props

30. Maybe put a matte marine rated clear coat on the chairs and they will last for ages

31. fyi your audio levels are off, your audio is peaking like crazy 😉

32. Looking forward to the real last episode when you get the gearing sorted out.

33. Still had your side fenders out.

34. Sure gonna miss that serie!

35. You didn't sand and buff the table top?!? =)

36. needs turbos…. for economy 😉

37. What if you clean the floor with a dry ice gun?

38. B is for a better mic 🙂

39. Awesome to see the boat work finally coming to fruition! Excellent job!

40. this is the most amount of people ive seen with letter profile pictures

41. 🌟🌟🌟🌟🌟 Upholstery Thread 4 main sizes, #207 – .4724 mm dia. , #277 – .5867 mm dia. , #346 –
    
    .7188 mm dia. , #415 – .8382 mm dia.

42. FYI, it’s called a mooring, not a parking spot 😎

43. The front is buried too far down in the water, raise the tabs. Only about half the boat should be in the water at full speed.
    Also, less aggressive propellers so the engines can make it into their power band.
    You don't need them to go to redline, just a smudge past powerband wide open.

44. Chris, buy a bottle of starbrite non skid deck cleaner. 100% succes! The wire brush will damage the non skid / epoxy layer. Please like this post so hé will see it.

45. time laps videos on the boat is so crazy when its parked.. it looks like it moves around sooo much.

Comments are closed.