More Shop Progress! (Getting the Bathroom Knocked Out)

Be sure to subscribe! ► https://www.youtube.com/boostedboiz

Merch ► http://boostedboiz.bigcartel.com/

Facebook ► https://www.facebook.com/BoostedBoiz-1696272047113834/
Instagram ► https://www.instagram.com/boostedboiz/

Personal Instas:
Kyle ► https://www.instagram.com/boostedboikyle/
Emilio ►https://www.instagram.com/boostedboiemilio/
Brent ►https://www.instagram.com/pfispeed/

Check these guys out!:
Pfispeed ► https://pfispeed.com/
Huxracing ► https://www.huxracing.com/
Street2track ► http://www.street2track.net/

Want to send us something?
Boostedboiz
PO Box 1357
Loveland, CO 80539

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

32 thoughts on “More Shop Progress! (Getting the Bathroom Knocked Out)

  1. Hey Kyle, we’ve met a few times. I love the videos and the work you put out there for people to see. I know you have a lot of projects but, something for the future has popped up in my head. Turn the van AWD! It would be awesome man!

  2. Pedro is awesome. I wish I had an uncle like him. He reminds me of my dad who past away a few years ago. He was a jack of all trades when it came to building a house or car.

  3. Old calipers eat pads faster because the seals wear out and don't pull the pads away from the rotor anymore. New calipers all around and they'll last longer👍

  4. You will be very surprised how much more braking power you'll have if you change the caliper or the flex brake line that goes to the caliper I've found alot of time you will need to do both sides cause sometimes it will pull one way if you only change one side

  5. Do the calipers have those stupid twist pistons? Working at a shop here i ran into a lot of them, I feel like my accords rears at the very least had em. Instead of just pressing them in the head has two or four little machined "holes" (they don't go all the way through). Theres a brake tool that has fancy attachments with different placement "studs" on them. One will fit in the holes. Unless I'm wrong entirely and its just a dead caliper.

  6. ive seen some of those calibers that u have to twist the piston as u push it back in, not sure if that one is like that but over the yrs working in my dads garage helping him with stuff that is something we have seen, most times theres places on the piston that u can set the tool in to twist it, some where big spots that really noticable while others were just small little notches around the edge of the piston.

  7. Rotate the piston on the caliper. It won’t just go straight in, I believe those twist in. You might even be able to turn it by hand.

  8. Yoooo 🤘🏻 if you’re into car shit and like burnouts and like to laugh make sure to go to my channel and look at my vids 👍 if you enjoy them leave a like or comment and if you really like them drop a sub

Comments are closed.