47 thoughts on “Our K-Swapped Jet Boat Is Ready To FLOAT!”
Needs a twisted tea wrap
Darn, another project incomplete.
Time to float KyLe 😂 keep going my bro 💪
R u guys not using a stomp grate
U should get some sort of boostedboiz rap on it ones u get it right
Choosing the bigger Scott jet pump is going to make that thing really powerful compared to the jet ski !pump ones !
You can't call yourselves the BoostedBoiz and have a N/A jet boat, come on man!
it may be useful to make a Gard for the pump so it cant hit rocks. its expensive protect your investment
Can you turn with the bucket raised?
Right on dude
How about less talking more doing. blablablablablablablablabla. Love you kyle but your early videos were so fun and now it feels like a school presentation when you just finished a report. I don't know if you can shake yourself out of it man but lets see you get silly and wild like the old days. too bad about charlie man he was so funny and silly. Wyatt is super funny when he's in the right mood so you have a lot of potential there. How is his shed doing. I hope its stocked with twisties to keep him sane. You still don't let him in the house right xDD have a good one lads, love you
The oldest rule to good story telling and film making: show don't tell
Kyle's famous line. "OK guys let's get this thing bolted ALL the way down." Lol love these videos.
Awesome video 📹!
Please use only stainless steel 316, trust me i work in a machine shop we do a lot of work for ships.
Kyle, the bigger #16 bung will INCREASE the pressure. Bigger hole means increase in pressure and lower velocity. Opposite is true for smaller holes.
Can't wait to see this thing ripping, hauling @$$ with ol cleet
I wonder if anyone has ever used panel bond to secure the poly to the bottom of these boats?
Gonna have way to much water flow at full tilt
Your builds are getting better and better.
Be sure to put a sand trap on the water intake for the motor
Byeeeee
Looks great
Do you not have a drain plug??? how are you going to forget to put it in like Cleetus does nearly every rip…… if you dont have one?? 😉
I predict the poly will never make it on the boat.
Drop it in the pool
Very nice work kyle rebuilding that bar area
Does it need extra buoyancy just incase of a tip over, I know it's no big block but be a shame if this boat went under
Most people don't even realise that the economy is collapsing and there is an increasing rate of unemployment worldwide🌍 so take advantage and prepare while things are still on the shelf in the store.
Like for sealing this opened profile at the back
Cant wait to see the maiden voyage! As a suggestion, try and use anti-seize on any stainless hardware that is going into the aluminum. Not as big a deal in fresh water, but salt water/moisture causes a reaction between the metals that can destroy the aluminum (I work in the marine industry and have come across this many times)
so excited for yall to finish this
Great job brother 👏👌👍
Still no way to change the oil?
Nice caulk
I thought u had a band saw
You should give the boat a name before you take it on the water.
What are you guys thinking it will make power wise? I think it needs a SC so you can spank Cleetus.
Yall absolutely have to do a boosted boiz wrap on the boat
I know jack shit about boats or jet skis 😬. What I keep coming back to is how are you going to disengage the engine from the jet pump when you stop or will it not be spinning fast enough to propel the boat ?
Nice job once again Kyle and Wyatt!
LET'S GO!!🏁
It’s gonna suck changing the oil in that thing
Top Notch Work!!
surprised you did'nt water test in swiming pool
How long before this jet boat has the same type of engine has the MR2 pushing 1200hp + nitrous
Needs a twisted tea wrap
Darn, another project incomplete.
Time to float KyLe 😂 keep going my bro 💪
R u guys not using a stomp grate
U should get some sort of boostedboiz rap on it ones u get it right
Choosing the bigger Scott jet pump is going to make that thing really powerful compared to the jet ski !pump ones !
You can't call yourselves the BoostedBoiz and have a N/A jet boat, come on man!
it may be useful to make a Gard for the pump so it cant hit rocks. its expensive protect your investment
Can you turn with the bucket raised?
Right on dude
How about less talking more doing. blablablablablablablablabla. Love you kyle but your early videos were so fun and now it feels like a school presentation when you just finished a report. I don't know if you can shake yourself out of it man but lets see you get silly and wild like the old days. too bad about charlie man he was so funny and silly. Wyatt is super funny when he's in the right mood so you have a lot of potential there. How is his shed doing. I hope its stocked with twisties to keep him sane. You still don't let him in the house right xDD have a good one lads, love you
The oldest rule to good story telling and film making: show don't tell
Kyle's famous line. "OK guys let's get this thing bolted ALL the way down." Lol love these videos.
Awesome video 📹!
Please use only stainless steel 316, trust me i work in a machine shop we do a lot of work for ships.
Kyle, the bigger #16 bung will INCREASE the pressure. Bigger hole means increase in pressure and lower velocity. Opposite is true for smaller holes.
Can't wait to see this thing ripping, hauling @$$ with ol cleet
I wonder if anyone has ever used panel bond to secure the poly to the bottom of these boats?
Gonna have way to much water flow at full tilt
Your builds are getting better and better.
Be sure to put a sand trap on the water intake for the motor
Byeeeee
Looks great
Do you not have a drain plug??? how are you going to forget to put it in like Cleetus does nearly every rip…… if you dont have one?? 😉
I predict the poly will never make it on the boat.
Drop it in the pool
Very nice work kyle rebuilding that bar area
Does it need extra buoyancy just incase of a tip over, I know it's no big block but be a shame if this boat went under
Most people don't even realise that the
economy is collapsing and there is an
increasing rate of unemployment worldwide🌍
so take advantage and prepare while things are
still on the shelf in the store.
Like for sealing this opened profile at the back
Cant wait to see the maiden voyage! As a suggestion, try and use anti-seize on any stainless hardware that is going into the aluminum. Not as big a deal in fresh water, but salt water/moisture causes a reaction between the metals that can destroy the aluminum (I work in the marine industry and have come across this many times)
so excited for yall to finish this
Great job brother 👏👌👍
Still no way to change the oil?
Nice caulk
I thought u had a band saw
You should give the boat a name before you take it on the water.
What are you guys thinking it will make power wise? I think it needs a SC so you can spank Cleetus.
Yall absolutely have to do a
boosted boiz wrap on the boat
I know jack shit about boats or jet skis 😬. What I keep coming back to is how are you going to disengage the engine from the jet pump when you stop or will it not be spinning fast enough to propel the boat ?
Nice job once again Kyle and Wyatt!
LET'S GO!!🏁
It’s gonna suck changing the oil in that thing
Top Notch Work!!
surprised you did'nt water test in swiming pool
How long before this jet boat has the same type of engine has the MR2 pushing 1200hp + nitrous
Hey boyz
you need a hand winch on that trailer.