The Hatch Is Running Again!

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

29 thoughts on “The Hatch Is Running Again!

  1. Some people binge watch Netflix etc on quarantine… I binge rewatching Boostedboiz, PFI, Cleetus etc. Murika.

  2. If he woulda have had a fuel pressure guage would he have known the 3rd cylinder injector wasnt working?

  3. Why no assembly lube on the cams or cam bearing caps. And if you have 2 out 4 wires with a bad connection in the same spot, why not fix the other 2 also unless you want to make a matching piston to the old number 3 piston you just replaced

  4. You said you use ebay turbos, is there a certain brand you go with cause i no some are bad and how much are they. Please respond i need boost

  5. Should not cheap out on using old drive belt for head. few bucks could easily end up costing whole engine. bend valve tru top of piston ruining the head, pistons and bottom end.

    Well , nothing more to add, you like to take risks. stupid risks, but what ever. aint my headache. But at your age, i wasnt listening either and had to do my mistakes and learn from them.

  6. I'm not sure if you did this off camera or not, but always put a little bit of oil where the cam sits so that when you first crank it it wont be bare metal to metal contact. You'll end up with scratches on the cams/tappets.

  7. you gota stop risking your lisence on cars that you know ur gona kill in a race, i cant say much cuz when i was in my early 20s id run anything but its not worth the risk when you already know the outcome just some words from the wise

Comments are closed.