Tried To Make It To The Track But My Car Had Other Plans

Stickers and Shirts –
http://boostedboiz.bigcartel.com/

Insta – Boostedboiz

Haydens Channel – https://www.youtube.com/channel/UCsgDV-kIl_LG1b3jgk18neQ

PFISpeed

Street2track.net

Huxracing.com

Want to send us something?
Boostedboiz
PO Box 1357
Loveland, CO 80539

Intro song –
Wontolla, Kasger & Limitless – Miles Away [NCS Release] https://www.youtube.com/watch?v=aCyQu00rZrM z

Kasger
– SoundCloud https://soundcloud.com/kaspergerlif
– Facebook https://www.facebook.com/Kasger
– Twitter https://twitter.com/Kasger

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

49 thoughts on “Tried To Make It To The Track But My Car Had Other Plans

  1. Can you help me out. Do you think my stock 92 civix dx could handle a full blown turbo kit???. Max would be probably 8lbs. Please let me know

  2. I hear you and Charlie got into a fight over a chick and he changed the password to the channel????? Is that why you haven't uploaded. Worried about you guys. I hope Charlie gets the help he needs I know he's going through a lot.

  3. Hey guys, whats like a fairly cheap jdm car with like a really good engine that I could rebuild and turbo? Don't really wanna engine swap though…

  4. Kyle you need to make your mr2 like the one with a k20 and quaffie sequential gear box making 900hp look it up on YouTube it's ridiculous

  5. Love the channel Kyle. Could you do a video on getting the toyota speedo and tach to work with the K24? Haven't seen a write up on this anywhere. Guys at monkey wrench racing say it is possible….

  6. I know how it is. you just gotta get it running. weather the 18 gauge wire is big enough or not. it will run. then you kinda forget about it. I know how it is. but I have enough faith. that I'll take that pump if you will give it away. I font think its bad. if it is. I don't think its from the wiring. it can heat the terminal of the pump. and heat that up. I have seen things like that happen. just stick to the recommend current for gauge wire. and overkill don't hurt. I'd run 12 gauge wire. if its over 6'- 8' ,under maybe 14 gauge. they would be no voltage drop to speak of that way. now turn it up!💪

  7. Thin wire would not kill a pump. That's not how motors work. The thin wire would however prevent the pump from pumping at full capacity. So likely the whole problem was the just the wiring and the old pump is fine… or it was until you ran water through it.

  8. Mostplus is garbage… I bought injectors from them them and were supposed to be low impedance 1000CC and they were high impedance low-flow (300cc maxed) after testing had to get my money back. whatever you do don't buy anything MostPlus it's definitely the bottom of the barrel of knock-offs and giving eBay a bad rap.

  9. Don't worry mate honestly I found and subscribed to you guys because of your MR2, been here since before you blew the original motor ;D

  10. Insects like the dragonfly use moonlight and sunlight to navigate, and your lights were throwing that thing through a loop.

  11. Use a gauge/run chart. It'll tell you at least what gauge of wire you need for the length of your run. Also, make sure you both fuse appropriately, and use parts (like relays) that are rated to not only meet, but to exceed the current you expect to draw, at least by 10% or so. This helps account for voltage/amperage fluctuation.

  12. Get a Walbro 255 man, they're like $90 and a lot better than a shitty eBay special. Some of the eBay fuel pumps literally have a motor in them that you would find in a very cheap cordless drill. They just aren't designed to be used in that way at all.

Comments are closed.