Turbo Minivan Build / Making the Manifold

Insta – Boostedboiz

PFISpeed

Street2track.net

Huxracing.com

Want to send us something?
Boostedboiz
PO Box 1357
Loveland, CO 80539

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

26 thoughts on “Turbo Minivan Build / Making the Manifold

  1. That little test you did comparing the merge collector to the standard cast style manifold was good, i didn't think they were that different.

  2. Dammm a fan sent you a turbo and you didn't use it!! If a fan sent me something I would use it! I'm pretty sure you still havent used it…..

  3. Nice job on the manifold layout guys. Here's the truth about back purge,yes it is stronger,but it's not the main reason for the purge the reason is,so you tig welds don't rust from the inside out,and it most definitely will and you know what is going to happen to your turbo when a pcs of that rust or all the porosity that is inside (and there will be porosity inside because it was not shielded from the atmosphere) it all gets pushed right into your turbo leading to catastrophic failure, I have seen this happen more then once guy. You did a killer job laying the manifold out,don't turn it into a turd and take the chance of trashing a turbo and costing yourself a lot more money over a few pcs of tape and a little extra gas to purge ALL YOUR STAINLESS TUBE TIG WELDS. LOVE THE CHANNEL AND KEEP THEM BIULDS COMING GUY. WE WOULD LOVE TO SEE YOU GO THE EXTRA MILE ON THESE KIND OF THINGS, WITH ALL DO RESPECT,

  4. I completely forgot about that Turbo if you got it laying around have you ever thought about doing twin sequential's on the Hondarue

  5. personally even tho its not as pretty, i woulda left that bit of flat steel between the flanges on just to give it a bit more stuctural strength so the runners arent holding all the weight, great job tho guys

  6. Do a junkyard Honda v6 build. V6 should spool that turbo and may have a little lag but u could always change the exhaust housing. It was free after all.

  7. I have a 2004 Nissan Quest with a 2011 Nissan Maxima engine my makes 300 horsepower all straight motor I want to convert to manual I don't know should I go turbo or supercharged since I have Auto at this point what do you think thanks

  8. front fender cut out, no use to put it behind the muffler…the muffler will stop the flow unless you do like I used to and cut the muffler and run it empty and that way the cops see it in there but unless your standing on it they don't know a thing.

Comments are closed.