How about lowering the boost? I mean is it really necessary causing potentially irreversible damage then having to start all over from scratch?
So y'all are definitely successful no doubt that's been proven but clearly there are just 1 too many minor details that is costing you time and money.
If the boost was lowered it would stress the puppy less. And in the event something were to fail it wouldn't be as catastrophic/costly.
How much does my opinion matter? None
With that being said turn up the boost to the max and continue to gather footage because honestly, whether it's a good day or a not so good day, that's why we're all hear for.
Good luck fellas.
Like breaking a Honda transmission is a new thing. Comon problem. Replace it with a stronger one. Move on.
We want that world record man set that beast up and get that record you can do it !
Didn't expect that? Have you seen your channel at all?
build a fan car under the front of the car.
Be so sweet if you just stuffed a J32 in it
I think riveting a thin sheet metal underneath would cut down so much drag and kill that pocket of air in the front
Put tha envelope on the GEO. HONDA MOTOR+VW muffler, and have you self a flying object. Keep up good content BigBoi. DSM#☝
Get a set of scales. It will give you a benchmark that you can work from.
haha the space X tune
time for a Lamborghini nose spoiler
Buusted Boiz ???
Sounds like they took the alternator belt off at the track🤔
for sure it was the wheelie, that was wild
12:40 Music at the end? Always hear it, never know if its a full track or just a custom end tune?
maibe support the front and the rear of the box with an engine plate , that way there isnt any weight hanging off the clutch housing or the driveshafts / diff torquing up the box against the engine plate in the middle , during the wheelie the rear wheels did come off the ground and landed spinning on the sticky stuff , verry good chance the ting was allready broken , goo thing the belt broke , think running that a second time wouldve hurted the gears inside it and probably the shifting mecanism too maibe you can make a deal with fasterprom and trade youre twin system with the header for their single one on the smart car
Would think the wheelie had some to do with it. If you can, ask Kevin at KSR what you could to make that stronger without going billet. Dude knows his stuff and is part of Cleetus gang.
On the new bell housing before you transplant it I would cnc some gussets up and re·in·force it
Pretty sure slamming the car down hard is what caused the bell housing to crack.
The nut on your shoot release was turning when you were 2 stepping. Idk if its supposed to but incase its not tighten that bitch up lol
so how much longer till you quit fuckin around and just get wheelie bars? lol
Wheelie bars kyle!!!!
Does a wheelie bar put you in a different class? Why don't you put one on to control the nose coming up?
Would still love to see it with wheelie bars!!
3agte is the solution of all yours problems
Please add ducting to the intercooler! My ocd can't take it
6:50, it was at this moment he realized he f*** up
Ruby engine??
I wonder if they make a proximity sensor or radar sensor that would fire down, it would prob be able to record height and arrest spark as needed. Like using a parking sensor but down facing. Seems like it would be way more simple than the laser setup. Lasers are pretty sensitive and I bet they dont like the violent shaking of a drag car. Just an idea.
Wheelie bar . for the trackk…. !!!
Too many ugga duggas on the bell housing
1. wyatt is a calming and sensible part of chan✅ 2. I really am here to see Leslie bounce off a jetski
You can go ahead and send me that AEM when you're done with it…I'll put it to good use!
Dude, drop the stupid weights and get rear wheelie bars.
Kyle you need to do this to the mr2 https://youtu.be/uhKr5eC-XG8
All the best Bro. hope to see MR2 back in action.
How about lowering the boost? I mean is it really necessary causing potentially irreversible damage then having to start all over from scratch?
So y'all are definitely successful no doubt that's been proven but clearly there are just 1 too many minor details that is costing you time and money.
If the boost was lowered it would stress the puppy less. And in the event something were to fail it wouldn't be as catastrophic/costly.
How much does my opinion matter? None
With that being said turn up the boost to the max and continue to gather footage because honestly, whether it's a good day or a not so good day, that's why we're all hear for.
Good luck fellas.
Like breaking a Honda transmission is a new thing. Comon problem. Replace it with a stronger one. Move on.
We want that world record man set that beast up and get that record you can do it !
Didn't expect that? Have you seen your channel at all?
build a fan car under the front of the car.
Be so sweet if you just stuffed a J32 in it
I think riveting a thin sheet metal underneath would cut down so much drag and kill that pocket of air in the front
Put tha envelope on the GEO. HONDA MOTOR+VW muffler, and have you self a flying object. Keep up good content BigBoi. DSM#☝
Get a set of scales. It will give you a benchmark that you can work from.
haha the space X tune
time for a Lamborghini nose spoiler
Buusted Boiz ???
Sounds like they took the alternator belt off at the track🤔
for sure it was the wheelie, that was wild
12:40 Music at the end? Always hear it, never know if its a full track or just a custom end tune?
maibe support the front and the rear of the box with an engine plate , that way there isnt any weight hanging off the clutch housing or the driveshafts / diff torquing up the box against the engine plate in the middle , during the wheelie the rear wheels did come off the ground and landed spinning on the sticky stuff , verry good chance the ting was allready broken , goo thing the belt broke , think running that a second time wouldve hurted the gears inside it and probably the shifting mecanism too
maibe you can make a deal with fasterprom and trade youre twin system with the header for their single one on the smart car
Would think the wheelie had some to do with it. If you can, ask Kevin at KSR what you could to make that stronger without going billet. Dude knows his stuff and is part of Cleetus gang.
On the new bell housing before you transplant it I would cnc some gussets up and re·in·force it
Pretty sure slamming the car down hard is what caused the bell housing to crack.
The nut on your shoot release was turning when you were 2 stepping. Idk if its supposed to but incase its not tighten that bitch up lol
so how much longer till you quit fuckin around and just get wheelie bars? lol
Wheelie bars kyle!!!!
Does a wheelie bar put you in a different class? Why don't you put one on to control the nose coming up?
Would still love to see it with wheelie bars!!
3agte is the solution of all yours problems
Please add ducting to the intercooler! My ocd can't take it
6:50, it was at this moment he realized he f*** up
Ruby engine??
I wonder if they make a proximity sensor or radar sensor that would fire down, it would prob be able to record height and arrest spark as needed. Like using a parking sensor but down facing. Seems like it would be way more simple than the laser setup. Lasers are pretty sensitive and I bet they dont like the violent shaking of a drag car. Just an idea.
Wheelie bar . for the trackk…. !!!
Too many ugga duggas on the bell housing
1. wyatt is a calming and sensible part of chan✅
2. I really am here to see Leslie bounce off a jetski
You can go ahead and send me that AEM when you're done with it…I'll put it to good use!