2007 Tahoe 5.3L Engine Part 2 – EricTheCarGuy

Link to full version of this video: http://www.ericthecarguy.com/vmanuals/22-vmanual-store/155-2007-chevy-tahoe-53l-engine-replacement-vmanual

Link to part 3: http://www.youtube.com/watch?v=eHjOHwn89NE

Visit me at: http://www.ericthecarguy.com/

Ah the second installment of the Tahoe engine swap, I thought it was going to be pretty straightforward, it gave every indication that it would be I was very wrong. I had hoped to finish the swap in one day but given some of the ‘little’ things that held me up like the fuel lines behind the ABS modulator, no space to put the hook between the rear of the engine and the firewall, having to take the exhaust off and the fastener that was placed behind the O2, little things that added up to kicking my butt. The cool thing was that I got to use 2 cameras for this shoot which makes this a historical event, it’s all for you my dear viewers.

Stay tuned for part 2 which should be next weeks video.

Click below and Stay Dirty

Visit me at EricTheCarGuy.com

Home

Visit EricTheCarGuy Forum
http://www.ericthecarguy.com/forum/default.aspx

Visit my Facebook Page:
http://www.facebook.com/EricTheCarGuy

Stay dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

38 thoughts on “2007 Tahoe 5.3L Engine Part 2 – EricTheCarGuy

  1. what do you do with your floor dry and oil rags? dispose the same way as used oil? the couple shops ive worked at in my life have just tossed it in the garbage…

  2. All right my LS guys in the comment section I have a 2005 Silverado and I'm working on it now and in my digging I found out that I may have 07 or better LS motor in there it may be a LS3 how can I tell the difference?

  3. Hooks?…Nahhh. Lift an engine & trans by the valve cover?…Noooo.
    Bolt through a chain link (with thick fender washers, if desired) using the extra bolt holes in the heads.

  4. I’m a little late to the party but I am the not so proud owner of a 2016 GMC Denali 5.3, and it is entirely a turd. They can’t give the redesigned 19’s away.

  5. @EricTheCarGuy There are fuel quick-connects at the top of the engine on the drivers side that would have saved some effort and frustration – not sure anyone else mentioned. Also I've found it easier to drop the trans out the bottom that drop the front diff. just my 2c . and yeah I know this is super old video

  6. Subscribed… also just to give u some advice and not saying you didn’t already know but when I pull trans with eng I hook the chain in the exhaust studs where the downpipe connects to it. That way it distributes the weight buddy

  7. I'm doing one now… yeah I thought it was going to be a piece of cake too.. all I can say is OMG!!  LOL … I hope it goes in easier with the motor tilting as it does…let me know what you come up with on your chain configuration…my motor is ready to come out the, but the cherry picker is not long enough. damn bumper is coming off.. lol   errrr     thanks for the conformation..

  8. Eric
    Love your videos. Can you tell me what kind of cameras that your are using to shoot your videos? I'm going to be diving into replacing a camshaft and lifter (s) on a 5.3 L , 2006, Silverado, with only 98,000 milles on it.

    Thanks
    Gary

  9. eric i have a question I have a 2007 new body style silverado with 4.8 engine, now i came up on a 2002 tahoe with a 5.3 no i want to swap the engines. now my question is it an easy swap??? i really want a 5.3 in my truck

  10. Even though Eric had a very hard time with this engine, especially without a lift, he seems much happier and way more enthusiastic than in his very recent videos. I love these "old" down to earth videos!

  11. Hey Eric I have a 2003 Chevy Tahoe ls rear wheel drive I have 190,000 miles on it so I want to replace the engine and trams and I saw the motor that u got u said that it's almost new my big question is we're do u get it from?

Comments are closed.