An Introduction To Beta Tools -EricTheCarGuy

The full line of Beta Tools can be found here: http://www.jbtoolsales.com/search.php?q=beta+#oid=1002_1

Nut Drivers: http://www.jbtoolsales.com/beta-tools-009430320-943-fl-s6-6-nut-spinners-943fl-in-box/#oid=1002_1

Torx T-handle set: http://www.jbtoolsales.com/beta-tools-009530060-953-tx-s8-8-t-handle-wrench-953tx-in-box/#oid=1002_1

Beta snap ring/cerclip Pliers: http://www.jbtoolsales.com/search.php?q=beta+tools+cerclip+Pliers#oid=1002_1

Beta T-handles (10mm): https://www.jbtoolsales.com/beta-tools-009520010-952-10-t-handle-wrenches-with-swivelling#oid=1002_1

Beta Tools Website: http://www.beta-tools.com/beta/index_en.html

I have a hard time calling this video a review since it’s mostly a show-&tell video. That said, I have been using the tools more since I got them. As I said in the video, many of these tools are specialty items. Really great to have in certain situations, but not ‘must have’ tools that you’d use everyday. That is, unless you’re working on German and Italian vehicles. Those vehicles use a lot of the fasteners these tools deal with such as the Allan wrenches. Speaking of those, the Allan tools from Beta are probably the best solution to those fasteners I’ve seen to date. I hope to be using them more in the future.

Tool reviews posted every other Wednesday.

Camera: Brian Kast

Thanks for watching!

The best place for answers to your automotive questions: http://www.ericthecarguy.com

Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/58938-an-introduction-to-beta-tools#142382

Useful articles.

Engine overheat: http://www.ericthecarguy.com/faq/what-to-do-when-your-engine-overheats

No start problems: http://www.ericthecarguy.com/faq/solving-automotive-no-start-problems

Idle issues: http://www.ericthecarguy.com/faq/solving-automotive-idle-problems

Performance issues: http://www.ericthecarguy.com/faq/solving-automotive-performance-issues

Diagnosing Noises: http://www.ericthecarguy.com/faq/diagnosing-noises-in-your-car

Diagnosing Vibrations: http://www.ericthecarguy.com/faq/determining-the-causes-of-vehicle-vibrations

Electrical Problems: http://www.ericthecarguy.com/faq/solving-automotive-electrical-problems

Brake Issues: http://www.ericthecarguy.com/faq/solving-brake-problems

Transmission issues: http://www.ericthecarguy.com/faq/solving-transmission-problems

HVAC problems: http://www.ericthecarguy.com/faq/solving-automotive-hvac-problems

Buying a Used Car: http://www.ericthecarguy.com/faq/what-to-look-for-in-a-used-car-purchase

Leaks: http://www.ericthecarguy.com/faq/finding-and-fixing-leaks

MPG: http://ericthecarguy.com/faq/finding-and-fixing-the-causes-of-poor-mpg

The best place for answers to your automotive questions: http://www.ericthecarguy.com

Social Network Links

Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts

Twitter: https://twitter.com/EricTheCarGuy

Google+: https://plus.google.com/100195180196698058780/posts

Instagram: http://instagram.com/ericthecarguy

Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content

Stay Dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

27 thoughts on “An Introduction To Beta Tools -EricTheCarGuy

  1. Beta tools require you to push down the tab and slam it in there, thats the reason u couldnt use it

  2. Man,beta is shit comparing the usag tools or heyco tools,i have service for commercial vehicles for 43 years never snapped or broken this tools was used and abused every single day,had beta once and never again poor quality man,as well as crappy snap on you have waranty but when snappy snap they told me your snap on is too old or you didn't buy snap on recently,one more thing if use tools 10 times per 10 years you can buy beta or snap on,if you use every day,buy usag or heyco.

  3. Here is a tip how to make the t handles useful: take/cut the handle off and weld/braze an old socket on the end, now you can use it as a standard extension with any ratchet. works like a charm.

  4. Hey Eric, now that you bounce those beta tools for the past 3 years, can you give us a review on how well they've served you so far?

  5. That is a nice set of special tools and they would be handy for a professional who works on European auto's. As for those working on American, and Japanese auto's there are plenty of special tools already on the market. When in the Air Force we got ours from Snap-On who wanted an arm & leg for them, but the government was paying for them.

  6. There ratchets and sockets are probably the best I've ever owned. The screw drivers are definitely better then craftsman but I like the blue points better. The mechanics hammer I have had been amazing as well. The slip joint channel locks rusted up fairly quickly.

  7. I mean, pretty interesting and cool, id be interested to see how they pan out, but I think traditional handtools are great and maybe we dont need to re-invent the wheel here

Comments are closed.