By far this is the best performance upgrade I’ve done to my 2000 Integra Type R so far. Not only was performance increased, but in my case, emissions as well. That is a very rare thing with performance parts in my experience.
I was lucky enough to purchase these exhaust parts used and I saved a ton of money as a result, but if you’re considering doing something similar to your vehicle, I strongly recommend quality exhaust parts like the ones I installed in this video.
I wish I had been able to dyno the car before and after the exhaust swap. Since I saved the old exhaust, that might be a possibility in the future. However, know that I do feel a ‘seat of the pants’ difference in the car with the new exhaust. I honestly can’t say enough good things about it. The car was fun to drive before, it’s even better now.
#ETCGVideo #ETCGBlackBeard #IntegraTypeR
Thank you for watching!
My Patreon Account: https://www.patreon.com/EricTheCarGuy
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog
Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1?sub_confirmation=1
Links
Magniflow Catalytic Converter: https://www.summitracing.com/parts/MPE-334106
O2 Sensor Bung: https://www.summitracing.com/parts/VPE-1194A
Skunk 2 Alpha B Series V1: https://skunk2.com/exhaust-tuning/headers/alpha-header-765.html
Tanabe Exhaust: https://www.tanabe-usa.com/touringmedalion.asp?id=7
VHT Header Paint: https://www.amazon.com/gp/product/B0082LKN4C/ref=ppx_yo_dt_b_search_asin_title
Tools
Milwaukee Die Grinder: https://milwaukeetool.com/Products/Power-Tools/Metalworking/Grinders/2485-22
Grinder: https://www.jbtools.com/bosch-gws13-50-high-performance-angle-grinder-5/
Milwaukee Sawsall: https://milwaukeetool.com/Products/Power-Tools/SAWZALL-Reciprocating-Saws/SAWZALLS/2721-22HD
Sawsall Blades (better): https://milwaukeetool.com/Products/Accessories/Cutting/SAWZALL-Blades/SAWZALL-TORCH-Carbide-Blades
Milwaukee Light: https://www.milwaukeetool.com/Products/Lighting/Personal-Lighting/2114-21
Drill: https://www.milwaukeetool.com/Products/Power-Tools/Drilling/Hammer-Drills/2706-22
Center Punch: https://www.jbtools.com/general-tools-77-automatic-center-punch/
Stepped Drill Bit: https://www.jbtools.com/astro-pneumatic-9445-titanium-step-drill-bit-set/
Welder: https://www.longevity-inc.com/migweld-140
Related Videos
New Parts for My Acura Projects: https://youtu.be/ZUkL45LNJMk
Supercharger Tear Down and Inspection: https://youtu.be/aW8tiYgAPmU
EricTheCarGuy Gets an Integra Type R: https://youtu.be/_OfMvfFSztM
How I Got My Type R: https://youtu.be/fVkNTrWzgc4
Integra Type R vs Integra GSR: https://youtu.be/4tK85arURO0
5 Things You Should Know When Building a Turbocharged Engine: https://www.youtube.com/watch?v=9b0G4cI70as&t=253s
Why My New Turbo is Better: https://www.youtube.com/watch?v=2UoT0RvUosc
What Does “Clocking a Turbo” Mean?: https://www.youtube.com/watch?v=dLY3l9D_lro
How To Install a Holley Sniper EFI: https://www.youtube.com/watch?v=Pr-93jijuVo
Type R Playlist: https://www.youtube.com/watch?v=_OfMvfFSztM&list=PLSzhQ6St-ov0sJT52tXnm59Vbk1wCvhGd
The FairmontProject Playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs
ETCGDadsTruck Playlist: https://www.youtube.com/watch?v=kCepnacqRuI&list=PLSzhQ6St-ov1g_GML2aVq6EN-_ShJ9G2o
**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Instagram: http://instagram.com/ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.
If you want an exhaust with a quiter sound but a cannon performance you could stuff a potato in the tailpipe
Absolute beautiful tone and I love how it wasn't a rushed job. Also how you used ss where a lot of shops wont. Hope mine sounds the same, going from eBay 3in to Tanabe ultra racing medallion
I like hw its actually fairly quite an clean sounding older vid but good job. Noticed the older ive gotten i still like after market exhaust but just something thats louder than stock but not loud
Car smokes out exhaust, throws P0"420" code, tight.
Also, I own a b18c5 myself and daily it, do you get any blow by on decel in gear?
Greetings also from Dayton, Oh.
: )
Titanium exhaust heat wrap works awesome with temp and wrapped correctly looks amazing, also would help with your dip stick.
Now since it’s been a year are you getting any exhaust soot on the bumper from being so far in??
hi bro just asking about the s4c tranny it means it a short gear or long gearing
Sounds great! Hope she’s still running mean and clean!
What do you want for the stock muffler please
In my research alot of people said the skunk2 alpha would require you to delete the A/C. This looked like it fit great! Good to know for the future. I went with a DC header for my GSR
There definitely wasn't a better way to do this……
I’m crying inside 😭 poor type r
What happened to this car?
Great vid!
Question though, is the header carb legal? Having a tuff time finding a street legal header living in California
I get that occasional rattle that probably is inside the muffler ! Gotta give it a wham with the hand and see. The second time I see you take off 02 sensors, when replacing exhausts. OE sensors are available, the same manufacture is stamped on the sensor, ie; NTK on mine. The flange where the header connects to the pipe, is cocked. One side is closer than the other.
sounds great but Eric, did you blow a head gasket? 😮 lots of smoke
Those seats make me so glad to have a AUDM
Love the way it sounds!!! Much respect Eric!👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽
please give us more integra type r content, Eric! We want to see you restore this beauty!
Great video. I personally TIG weld all exhuast with stainless filler so that paint is not needed.
Hey Eric what’s the new hotness for tires? Still loving the Michelins?
Where more?
I actually still have one of those donut gaskets laying around from my 92 integra.