Ford Fox Body Rear Stabilizer Bar Installation

Previous video in the series: https://youtu.be/u01BmTY8iBg

This video is the last in the series where I upgrade the rear suspension in my fox body #FairmontProject. In this episode I cover the installation of a rear stabilizer bar from Maximum Motorsports.

This isn’t your average bolt on stabilizer bar. This unit mounts to the body and works like a ‘real’ stabilizer bar. It’s also adjustable.

Because it mounts to the body of the car, it requires some welding. Be sure you have one handy or that you have someone with a welder and welding experience install it for you.

With this new stabilizer bar, my Fairmont will be cornering like it’s on rails. I can’t wait to drive it.

Special thanks to Jack Hindley and Kolton Sinclaire for all their help.

Link to stabilizer bar used: http://www.maximummotorsports.com/Adjustable-Rear-Swaybar-solid-axle-Mustang-1979-2004-P546.aspx

Installation instructions: http://www.maximummotorsports.com/assets/install/pdf/rear_susp/MMRSB-1to-9.pdf

Maximum Motorsports website: http://www.maximummotorsports.com/Default.aspx

The #FairmontProject playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs

The best place for answers to your automotive questions: http://www.ericthecarguy.com

Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog

Camera: Brian Kast

Thanks for watching!

Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/68112-fairmontproject-rear-stabilizer-bar-installation

Tools

Bendpak Lift: http://www.bendpak.com/car-lifts/two-post-lifts/xpr-10s-lp.aspx

Torque Wrench: http://www.rakuten.com/prod/282405511.html

My Welder: https://www.longevity-inc.com/mig-welders/migweld-140

Makita Grinder: https://www.jbtoolsales.com/makita-ga4030-4-angle-grinder#oid=1002_1

Center Punch: https://www.jbtoolsales.com/lisle-30280-automatic-center-punch-5-1-2-long#oid=1002_1

Angle Finder: https://www.jbtoolsales.com/gearwrench-2968d-angle-finder#oid=1002_1

VHT Black Paint: https://www.amazon.com/VHT-SP671-Satin-Black-Chassis/dp/B000CPAVI4/ref=sr_1_2?ie=UTF8&qid=1492446680&sr=8-2&keywords=vht+roll+bar+paint

Related Videos

Rear Control Arm Installation: https://www.youtube.com/watch?v=cexlY__Cf-I

How To Install a Maximum Motorsports Torque Arm For Better Traction!: https://www.youtube.com/watch?v=b8E4XV4cUWc

How To Install a Panhard Bar: https://youtu.be/u01BmTY8iBg

Removing the Old Differential #FairmontProject: https://www.youtube.com/watch?v=rZp_Wy95Z8M&t=34s

8.8 Differential Tear Down: https://www.youtube.com/watch?v=Plvg0NTLraA

How To Clean Prep and Paint a Differential: https://www.youtube.com/watch?v=il8nDlCepyc

8.8 Assembly and Set Up (Part 1): https://www.youtube.com/watch?v=5fARhE7v5Bg&t=112s

8.8 Assembly and Set Up (Part 2): https://www.youtube.com/watch?v=npUBF9Wj1Iw

Installing the New Differential #FairmontProject: https://www.youtube.com/watch?v=3E9BA6YlhjU

80hp & 3:55 Gears: https://www.youtube.com/watch?v=7cJpuLjshrA&t=2s

Things You Should Know About Differential Gears: https://www.youtube.com/watch?v=0Y6vOwiCe1U&t=56s

How To Fabricate Parking Brake Cables: https://www.youtube.com/watch?v=YeyaFW1CFPY

**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq

Social Network Links

Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts

Twitter: https://twitter.com/EricTheCarGuy

Google+: https://plus.google.com/100195180196698058780/posts

Instagram: http://instagram.com/ericthecarguy

Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content

Stay Dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

source

Author: Rafael

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)