Found the time to start dismantling Nicole’s SR20 that threw a rod a couple weeks ago. I’m selling all parts locally so PLEASE do not hit me up asking for anything 🙂
http://LZBMX.com
44 thoughts on “Is her blown up engine worth money? SR20DET TEARDOWN”
Comments are closed.
Me was in japan too
the worst engine in the racing world .
Hi Adam, can i have your email please, i want to write a detail email to you regarding something serious business
My boy Tim bought the motor from you and now I’m about to finish the top end rebuild for it soon
Wait a minute. Did you used to work aircraft maintenance in the Air Force when you lived in japan?
You guys back together now? Hope all is going well🤙🏻
LET ME GET THAT CAM ANGLE SENSOR BROO
Was that an oddessyFAB external Watergate mod? If yes, how was the response of the gate in the cast manifold.
dude…compression tester is your bestest friend
you got the gloves now get a cheapo jumpsuit so you don't ruin clothesu
Also yes they only have one valve with the fork. It's to keep that rocker lined up on 2 springs but run off of 1 lobe on the cam.
When you tear down an engine it gets to be a pain keeping track of hardware. Check out RAD Dan Drifts. He has like a tackle box that he dedicates to engine teardown all the compartments labelled. Then when the machining is done and it's ready for reassembly he isn't looking for the ziploc bags he has a bin and every compartment tells him where the hardware is. I've Bern a mechanic in diesel shops and race shops and his way is goi g to be the way I start doing my next builds.
I'm late but if u still have the coil pack setup and valve cover hmu adamLz
was that water in the radiator? Coolant does cool just a little better, its not there only as an anti-freeze, it pressurizes differently, and that pressure also aids in cooling. And some compositions also are designed to exchange energy faster too. Another thing it does, it helps prevent deposits like minerals, rust etc, which slow the passage of the coolant, also making it just a little hotter as well. I use water just long enough to reach operating temp, and pressurize to check for leaks and to make sure the thermostat opens n fans turn on. After that it gets drained and filled properly. Doing it that way helps to flush out stuff. But you dont want to use 50/50 entirely, there will be some water left over throwing off the ratio, fill it mostly, get it stirred up and test it, use the final jug to adjust the mixture.
buy a straight edge and a feeler gauge brah
How much where you pushing with that setup?
9:10 nicole is so cute
i'll but it!!!
Darn! I just got a block that doesn't have a head and it would have been really nice to get that head and turbo. especially cause I was planning on putting in that cam and valve package, 🙁 I went to Tampa to get it too. Lol.
anything that belongs to a 1 million + sub youtuber is worth a pretty penny
HAHAHAHAHA! Comparing a pet to a child…someone's in for an extremely rude awakening.
Did you sell it?
What do you do for a living?
Mechanix gloves suck, oil and fluids still get inside, latex/ nitrile gloves are the way to go, use them and toss them, just buy a 400 pack from Costco and you'll hands will thank you
do a giveaway of the broken parts!!!
600 dollars thats some good head lmao
Put the front on ramps. This will put the radiator at the highest point. It will bleed air bubble better. Another shot would be to use compressed air. Disconnect the heater core lines, then blow them out.
adam seems like the whiniest little ocd I want everything my way little bitch. Nicoles deffinitly just along for a ride on the gravy train lol
check the idle air control valve like so adam will see!
I want that head. money in hand
what the song at your videos ending ?
these are the most unrealistic prices I've ever heard of! That's retail not someone selling it out of their garage.
SELL ME THAT TURBO SETUP
Waiting for the comment, "I would let Nicole play with my puppies"
Mechanic by day, Calvin Clein model by night..
Adam, you have to run coolant in a radiator. You can't run just water! Antifreeze increases the boiling point of the water. When water boils, it loses its cooling properties. Run a proper coolant mixture and you'll be all good brother!
You need to invest in a coolant bleeding funnel. https://www.amazon.com/Lisle-24610-Spill-Free-Funnel/dp/B001A4EAV0. A must for bleeding the air out of a cooling system.
It is funny how the SR20DET is a piece of junk to you now that you have a 1jz. I enjoy your videos, but man you are clueless.
lift the front of the car up makes it easy to get all the air out
How much is the engine worth (minus the block)
Why bother she doesn't know how to drift she stresses the engine out
running big cams in an sr20det without rocker stoppers, if it didnt throw a rod it wouldve thrown a rocker before long,
he should put the turbo off the sr20det on the 1jz
when adam writes a signature on a part, it already wil be worth more by fans. (tip)