Mini Cooper N14 Bent Valve Repair (Part 1)

This can happen if the timing chain on your N14 skips time and bends valves which is a common issue.

I cover diagnosis of bent valves in this video: https://youtu.be/cCrbrz7nERI

Here’s a link to (Part 2): https://youtu.be/Wh3sK3Vnv_g

This video walks you through the process of replacing bent valves in an N14 engine. It covers cylinder head removal, cam shaft removal, timing chain removal, and also valve removal.

See the ‘Related Videos’ section for additional videos on front end removal as well as other Mini Cooper repairs.

My Patreon Account: https://www.patreon.com/EricTheCarGuy

The best place for answers to your automotive questions: http://www.ericthecarguy.com

Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog

Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1?sub_confirmation=1

Thanks for watching!

Tools

Ingersoll Rand 3/8″ Impact: https://www.jbtoolsales.com/ingersoll-rand-w5132-k12-iqv20-3-8-drive-impactool-bl2022-kit#oid=1002_1

1/4” Milwaukee Driver: https://www.milwaukeetool.com/Products/Power-Tools/2453-22

Milwaukee 1/2” Impact: https://www.milwaukeetool.com/Products/Power-Tools/Fastening/Impact-Wrenches/2863-22

Milwaukee 3/8″: https://www.milwaukeetool.com/Products/Power-Tools/Fastening/Ratchets/2557-20

ETorx: https://www.jbtoolsales.com/lisle-26280-external-torx-bit-socket-set-10-piece-e6-to-e20#oid=1002_1

Lisle Valve Keeper Tool: https://www.jbtoolsales.com/lisle-36050-valve-keeper-remover-and-installer-kit#oid=1002_1

OTC Valve Spring Compressor Tool Kit: https://www.jbtoolsales.com/otc-4842-heavy-duty-valve-spring-compressor#oid=1002_1

Timing Chain Tools (Includes flywheel holder): https://www.jbtoolsales.com/assenmacher-mc1400-mini-cooper-engine-alignment-tool-set#oid=1002_1

Torque Wrench: http://www.rakuten.com/prod/282405511.html

Torque Angle Gauge: https://www.jbtoolsales.com/otc-4554-torque-angle-gauge-1-2-drive#oid=1002_1

Hose clamp plier set: https://www.jbtoolsales.com/otc-4496-5-piece-hose-clamp-pliers-set#oid=1002_1

Small Hose Clamp Plier Set: https://www.jbtoolsales.com/tool-aid-19750-hose-clamp-plier-set#oid=1002_1

Astro Pneumatic Light: https://www.jbtoolsales.com/astro-pneumatic-40sl-rechargeable-cob-led-slim-work-light-410-lumens#oid=1002_1

Related Videos

Mini Cooper S (R56) Front End Removal: https://youtu.be/2RfQsOwBZHk

How To Replace Valves: https://www.youtube.com/watch?v=qEe8C5u1LWg&t=704s

How To Remove Valve Springs Inside the Car: https://www.youtube.com/watch?v=_uO5YayiLrA

Introducing The Mini Series: https://youtu.be/Ajsk8kgafXg

Mini N14 Timing Chain Replacement: https://youtu.be/VoPz9sEvYN4

Mini Cooper Engine Removal (R56/N14): https://youtu.be/338Wx0fOS3U

Mini Cooper Engine Installation (Part 1): https://youtu.be/56lB1hDngqU

Mini Cooper Engine Installation (Part 2): https://youtu.be/4oXAD1YRbCk

Mini Cooper Rear Hatch Won’t Latch Repair: https://youtu.be/F0nuP7sfhZs

Mini Cooper Oil Leak Repairs (R56/N14): https://youtu.be/7MWiOnZxURw

Direct Injection Intake Valve Cleaning (R56/N14): https://youtu.be/JJcX0eRZmFA

The Mini Series: https://www.youtube.com/watch?v=3WpqmJT_Wc0&list=PLSzhQ6St-ov37fMEv1xKYiu36MgvzUscu

**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq

Social Network Links

Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts

Twitter: https://twitter.com/EricTheCarGuy

Google+: https://plus.google.com/100195180196698058780/posts

Instagram: http://instagram.com/ericthecarguy

Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content

Stay Dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

source

Author: avnblogfeed

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

44 thoughts on “Mini Cooper N14 Bent Valve Repair (Part 1)

  1. These aren't any more difficult than any other modern car. I didn't watch the video in extreme detail but I think I heard Eric say he's reusing oil and coolant. No. Never. There's always metal shavings in the oil especially. As much as it sucks to waste, it sucks much more to have to re-work or replace an engine.

  2. I’ve removed the down pipe a separate four occasions for different work including replacing it on my 09 R56, talk about a pita but I don’t think it’s ever been worth pulling the front end off as you’ve shown here. But I appreciate these videos. Where were you when I first got my 09 Mini. Guess I should have started a YouTube back then instead of only just recently (it’s not on my Mini though [Tech & DIYs]).

  3. I am about to take this exact project on. Same issue with the same valves on the same cylinder. Compression and leak down tests narrowed it down. I’m so glad you made this video! Thank you!

  4. I love how many people comment about how difficult removing and reinstalling the head on a Mini is and that some believe only German engines are zero clearance. To begin with Honda, VW also make and sell zero clearance engines. The biggest surprise for all the armchair mechanics, this engine is not even of German design or build, it is a French Peugeot engine.

  5. Man this is overwhelming to watch. I absolutely admire your dedication. I have an 88 crx that is a breeze to work on. My wife has a 2010 R56 and we've been through a handful of problems. Repairs are expensive! Beautiful car but nonetheless a piece of crap lol

  6. Hey how much is the cost for doing the job on that mini cooper,? I have a 09 base model mini, the car start smoking only when ac is on the mecanic say is the valve seals, but he is not shure 100%

  7. Eric you are the man. I appreciate your video so much. You thought me not to be afraid to take things a part. I did it! If works like a champ. I have one sugestión. Be careful when you clean the engine with carburador cleaner, it may ruin some seals, specially around the turbo lines. God bless you man.

  8. Hi Eric
    I’m having a similar problem with my Ram 2500 Hemi 5.7L
    I’ve heard this can be done be removing the bottom engine cover
    Is this true , what can be done ?

  9. the piece behind the intake is called a noisemaker (i believe) and it does indeed make engine noise into the cabin. you can buy deletes for it but you do need that hose running into the cabin or else you wont have any air in the cabin. Mine disconnected and it makes it seem like your blower motor went bad.

  10. i did a engine overhaul on my n14 and finished it this weekend. after 25 miles the bottom crank bolt came completely out, thank god the new supertech forged pistons has dual relief cuts no i had no valvetrain issues. i took it back apart and reinstalled the crank bolt and re torqued it. it started and seems to be fine. i did the 50nm plus 180 both times. any idea what could have caused it to back out?

  11. Mechanics are never in the wrong even though their previous repairs fail and cause further problems. Again there is no such thing as a good mechanic.

  12. I can not seem to get the VANOS actuator off, the bolt is out, it spins in the head but will not come out of the head and I don't want to ruin it by banging on it or cause any more damage. If you have any recommendations please share. Thanks,

  13. i have a 2008 mini copper s turbo automatic with no reverse lights, bulbs are good,fuses are good i do noit hink is has areverse switch???? do you think it could be the foot moudle??? help

  14. Hey Eric I know nothing about engines my mechanic said I need a valve job on my 2006 honda civic si. What should something like this cost and would that be the only thing necessary to make the engine good? It never stalled it suddenly started shaking and I had to pull over. It now has over 200.000 miles on it. I bought the car new in 06 never had any problems always kept oil changed. Would like to keep it as an extra car if I can get it to run right again. Thanks Eric!

  15. yip! As these poor vehicles has many flaws, Like a fetal alcohol syndrome born baby!! In own experience on Cooper S R56 with only 55 000 km on odometer!! little lemons i tell you! premature timing chain tensioner failure! Death rattle at 55 000 km!
    why deceive people thinking they buying a bmw quality vehicle and in fact its a Peugeot 207 engine!! HUH?? omg at bmw price! high fuel pressure pump failed twice, vacuum pump, failed..worst of the worst ever..save your money! dont buy this shit

Comments are closed.