Wilton 4600 Bench Vice Review -EricTheCarGuy

Wilton 4600 Bench vice $196.99: http://www.jbtoolsales.com/wilton-14600-6-5-reversible-swivel-mechanics-vise#oid=1002_1

Wilton website: http://www.wiltontools.com/us/en/home/

I got my new Wilton vice from J&B Tool sales. http://www.jbtoolsales.com#oid=1002_1

To say I love my new vice would be something of an understatement. I freaking love my new vice. My old vice was getting pretty worn. When I used it to do the pipes for my air system it was very evident. So when I went looking for a new vice I stumbled on this unique design from Wilton. It’s reversible so you can have an extra wide opening if you need it. Honestly, I just like the extra anvil on top. I’ve found it to be very functional.

I’ve worked with a few vices over the years and I can honestly say this is a quality vice that I believe I’ll be using for years to come.

Camera: Brian Kast

Thanks for watching!

The best place for answers to your automotive questions: http://www.ericthecarguy.com

Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/61179-wilton-4600-bench-vice-review#153324

Related Videos

Welder/Plasma Cutter Video: https://www.youtube.com/watch?v=0n2CzzF0aAE

ETCG’s New Bendpak Compressor: https://www.youtube.com/watch?v=6Nmz5Pytsi0

How To Thread Iron Pipe: http://www.ericthecarguy.com/exclusive-videos/73-exclusive-videos/1286-etcg-s-air-system-repair-with-a-lesson-in-pipe-fitting-exclusive-video

Useful articles.

Engine overheat: http://www.ericthecarguy.com/faq/what-to-do-when-your-engine-overheats

No start problems: http://www.ericthecarguy.com/faq/solving-automotive-no-start-problems

Idle issues: http://www.ericthecarguy.com/faq/solving-automotive-idle-problems

Performance issues: http://www.ericthecarguy.com/faq/solving-automotive-performance-issues

Diagnosing Noises: http://www.ericthecarguy.com/faq/diagnosing-noises-in-your-car

Diagnosing Vibrations: http://www.ericthecarguy.com/faq/determining-the-causes-of-vehicle-vibrations

Electrical Problems: http://www.ericthecarguy.com/faq/solving-automotive-electrical-problems

Brake Issues: http://www.ericthecarguy.com/faq/solving-brake-problems

Transmission issues: http://www.ericthecarguy.com/faq/solving-transmission-problems

HVAC problems: http://www.ericthecarguy.com/faq/solving-automotive-hvac-problems

Buying a Used Car: http://www.ericthecarguy.com/faq/what-to-look-for-in-a-used-car-purchase

Leaks: http://www.ericthecarguy.com/faq/finding-and-fixing-leaks

MPG: http://ericthecarguy.com/faq/finding-and-fixing-the-causes-of-poor-mpg

The best place for answers to your automotive questions: http://www.ericthecarguy.com

Social Network Links

Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts

Twitter: https://twitter.com/EricTheCarGuy

Google+: https://plus.google.com/100195180196698058780/posts

Instagram: http://instagram.com/ericthecarguy

Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content

Stay Dirty

ETCG

Tool Review Disclaimer: ETCG is not paid to do tool reviews. Yes, I get to keep the tools after the review, but I do not receive any financial compensation for any reviews. The views expressed in this video are my own and unsolicited.

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

source

Author: Rafael

ANGELHOUSE © 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| & THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (AVNBLOGFEED.COM)

39 thoughts on “Wilton 4600 Bench Vice Review -EricTheCarGuy

  1. Cast iron vise with low 30,000 PSI strength, reversible jaw and lifetime warranty are the only selling points for $200+ for this

  2. ok when you thread pipe you are supposed to use those jaws below the main jaws they havea sort of vee for grabbing round stock that tends to spin while you are working . They are pipe jaws .

  3. Hey, Wilton is a good quality vise. Look at my channel so you see something new and how to test it, a new type of bench vise.

  4. As I see how nice your shop is, I'm wondering why you cheaped out with a Chinese made vise. Yes,that model Wilton is Chinese. A person needs to upgrade to a USA made Tradesman Wilton vise as a minimum. Or if you can't afford a new Tradesman Wilton vise, find a good USA made used vise. I know you're stoked on your new vise but honesty it's a turd. You probably have thousands of dollars in name brand USA made sockets and wrenches but yet you buy a $10 Chicom vise. SMH.

  5. Great review. Great vise. I like how you can change the opening to a wider opening or "vice versa". Sorry for the pun.

  6. Hi, I know you posted this video a year (or more, heh) ago, but I wanted to know if you still felt that this vise was a good value for the money, and I wasn't sure where else to ask. I'm asking because I just (yesterday) managed to snap the moving jaw off my old buffalo brand vise, and I need a new, preferably stronger, vise as soon as I can get it; I'd been looking at this vise and stumbled upon your video in the course of researching it, so I figured I'd ask how your opinion of the vise had changed after a year of using it. Sorry for the long comment, especially on such an old video!

  7. Simply , you should not be allowed to use a vice . Ill pay the shipping on your old one before you grind the ears off of it . Look under the top ears and you will find Knuckles for holding pipe in place .  Thanks

  8. brockhorst/heuer I find the best, loosens directly and no pipe clamps cos stands in the way bending small pieces, use RIDGID pipe clamps and for small indication for quality, clearence top bottom must be big, check cheap prc vices , you will know what I mean, goedendag

  9. The Columbians are made by Wilton, or at least they are now. I've got a big old 6" Columbian that has to be 50 years old, she needs new jaws but it's been a tank for as long as I can remember

  10. I'm glad you like your 4600, Eric. If you really want a nice vise though, keep your eyes peeled on craigslist for an old Wilton C3. You'll probably spend even more on a used C3 than you did on your new 4600, but it's a Ford Excursion compared to an Escape.
    A new C3 runs around $1500.

Comments are closed.