36 thoughts on “Putting My 1600HP Mr2 on Pure METHANOL!”
Really nice work, guys!
Can you guys sponsor me a turbo for my Suzuki swift sport zc31s just a small turbo just something to give me a start towars my future goals
🙌
Hey Kyle I am in Texas and Im thinking of moving to colorado are yalls guns laws good and all? or should I just stay here ?
oh no, we lost kyle, another future meth addict 😂😂
I’d rather watch your stuff than cleets. I can’t get down the all the airplane helicopter shit 😊
Please turn ON the camera stabilizer.. The jittery motion makes me sick. No joke..
Did he just call a 2jz a 4 cylinder?
Hope your planning on purging the system when your not running the car for a period of time. Meth with eat aluminum and gel in your system. I found out the hard way $$$
when i first watched you guys, i thought this was mickey mouse garage, but you are deffeinately coming out with better videos and workmanship. Keep it up
i understand wy he makes a new harnes its easyer to just start from new then to hack into a harnes and it gets messy you get points that can fail so new harnes yes
The exahust manifuld moved straight up, not left/right/front/back.. you could have added straight verticle pipe. Why did you cut on a perpinduclar axis than the vertical axis? You just needed to add like 1/2in vertically but you cut a compound angle into multiple pieces and multiple welds instead of one piece and one weld that would be on a singular flat plane.
Ive had nothing but problems with ktuned throttle body
Now sell that bracket! There have to be guys willing to buy them!
why not just adjust the torgue with timing. no need to lower actual cc
Wyatt is a bad ass dude. Fab work making brackets wiring etc. Wyatt can you give me direction on a book about wiring in automotive? I have basic understanding but really want to understand how things really work in the wiring
You need fire suppression Kyle.
Waterman Pump would have kept up
You guys just quickly and casually do the things I’ll have to wait for retirement to find time for😅. I need to borrow y’all for a weekend so I can do my engine bay harness, hot and cold sides.
Why not just move the intercooler to accommodate the 3/4 inch?? Maybe a spacer so to speak.
literally just a video on a fuel system…..
185 Hirthe Walk
You should get a fire blanket
METH R 2 she's gonna flyyyyyyyyy and then go pawn your impact wrench
Loose the intercooler IMO
You don’t need an intercooler with M1
Yo yall should mass produce that bracket and sell it!!!
Bro considering I’ve watched every video of yours, could I get a free t-shirt or part off a car? That would really make my year. Top og fan right here, much love from wales..uk 🏴
Jbr has got the worst builder out there man stop backing them so hard
I love watching these videos, i always learn a lot.
Sell the idea patent !! The cover adapter
Might want to cut up some more of those coil brackets and put them on your merch site or work out a deal with Old Doug at motion to make and sell the bracket! Just a thought!!
Wyatt, what a machine building wire harness after wire harness. Such skills!!!! Love you too Kyle…😂
Whoever is making the billet K24 should be able to programme the standard fixing points of the cast block into the cut for the billet. Unlyits already been made
when we getting another J build?
If you’re not running a fire suppression system with M1 I’d highly suggest getting one!
Really nice work, guys!
Can you guys sponsor me a turbo for my Suzuki swift sport zc31s just a small turbo just something to give me a start towars my future goals
🙌
Hey Kyle I am in Texas and Im thinking of moving to colorado are yalls guns laws good and all? or should I just stay here ?
oh no, we lost kyle, another future meth addict 😂😂
I’d rather watch your stuff than cleets. I can’t get down the all the airplane helicopter shit 😊
Please turn ON the camera stabilizer.. The jittery motion makes me sick. No joke..
Did he just call a 2jz a 4 cylinder?
Hope your planning on purging the system when your not running the car for a period of time. Meth with eat aluminum and gel in your system. I found out the hard way $$$
when i first watched you guys, i thought this was mickey mouse garage, but you are deffeinately coming out with better videos and workmanship. Keep it up
i understand wy he makes a new harnes its easyer to just start from new then to hack into a harnes and it gets messy you get points that can fail so new harnes yes
The exahust manifuld moved straight up, not left/right/front/back.. you could have added straight verticle pipe. Why did you cut on a perpinduclar axis than the vertical axis? You just needed to add like 1/2in vertically but you cut a compound angle into multiple pieces and multiple welds instead of one piece and one weld that would be on a singular flat plane.
Ive had nothing but problems with ktuned throttle body
Now sell that bracket! There have to be guys willing to buy them!
why not just adjust the torgue with timing. no need to lower actual cc
Wyatt is a bad ass dude. Fab work making brackets wiring etc. Wyatt can you give me direction on a book about wiring in automotive? I have basic understanding but really want to understand how things really work in the wiring
You need fire suppression Kyle.
Waterman Pump would have kept up
You guys just quickly and casually do the things I’ll have to wait for retirement to find time for😅. I need to borrow y’all for a weekend so I can do my engine bay harness, hot and cold sides.
Why not just move the intercooler to accommodate the 3/4 inch?? Maybe a spacer so to speak.
literally just a video on a fuel system…..
185 Hirthe Walk
You should get a fire blanket
METH R 2 she's gonna flyyyyyyyyy and then go pawn your impact wrench
Loose the intercooler IMO
You don’t need an intercooler with M1
Yo yall should mass produce that bracket and sell it!!!
Bro considering I’ve watched every video of yours, could I get a free t-shirt or part off a car? That would really make my year. Top og fan right here, much love from wales..uk 🏴
Jbr has got the worst builder out there man stop backing them so hard
I love watching these videos, i always learn a lot.
Sell the idea patent !! The cover adapter
Might want to cut up some more of those coil brackets and put them on your merch site or work out a deal with Old Doug at motion to make and sell the bracket! Just a thought!!
Wyatt, what a machine building wire harness after wire harness. Such skills!!!! Love you too Kyle…😂
Whoever is making the billet K24 should be able to programme the standard fixing points of the cast block into the cut for the billet. Unlyits already been made
when we getting another J build?
If you’re not running a fire suppression system with M1 I’d highly suggest getting one!