Tag: 240z
The M5 Engine is Officially Mounted in the 240Z!!!
In todays episode we mount the S85 M5 engine in the 240z Tube frame chassis. ❱ Shop – http://bisforbuild.com/ ❱ Patreon – http://www.patreon.com/user?u=3364742 ❱ Facebook…
Mocking Up The 240Z Body Placement
In todays episode were focusing on figuring out how low we can get the 240z body to sit on the frame.. and its good news!…
Saying Goodbye to the RX7 😢
In todays episode were yanking the M5 shell outa the shop, and sending the RX7 off to its new owner 🙁 ❱ Shop – http://bisforbuild.com/#shop…
The New 240z Tube Frame Chassis Has Arrived!
In todays episode we get everything sorted out and ready to start assembling the tube frame chassis. Check out our second channel http://youtube.com/builtnotbought ❱ Shop…
Building 240z/M5 Frame Rails – Was That Too Easy?
In todays episode i spend quite a bit of time measuring, and then we finally cut and weld up our frame rails for the 240z…
The Build Plan for my M5 Powered 240z
In todays episode we’re talking about how im going to utilize the BMW M5 V10 to power the 240z. Check out Khyzyl here: https://www.instagram.com/the_kyza/ https://www.artstation.com/khyzylsaleem…
The Subframe Mounts Are Done!!
In todays episode we finish creating the rear subframe mounts for our m5 subframe to mount to our 240z chassis. ❱ Shop – http://bisforbuild.com/#shop ❱…
Building Strut Towers For The 240z Chassis
In todays episode we build the rear strut tower for the 240z chassis to hold the M5 rear suspension. ❱ Shop – http://bisforbuild.com/#shop ❱ Patreon…
TOW TRUCK DRIVER CRASHED 3 OF MY CARS AND KILLED MY 240Z…
In todays episode, the worst tow truck driver in history takes a trip to BIFB headquarters to do some damage… ❱ Shop – http://bisforbuild.com/#shop ❱…
Back to Work! The Subframe is Mounted!!
In todays episode we build the second strut tower and then weld in the subframe mounts and test fit the M5 subframe onto our 240z…
BIFB Got A Little Wild At The Auctions :p
In todays episode I buy some cars and then we head to the shop to put in some work on the 240z. ❱ Shop –…
Getting the 240z Body Over the BMW V10 Engine!
In todays episode we temporarily mount the 240z body to the 240z chassis and make sure everything clears the engine. ❱ Shop – http://bisforbuild.com/ ❱…
Test Fitting The BMW V10 Engine!
In todays episode we are test fitting the engine! ❱ Shop – http://bisforbuild.com/ ❱ Patreon – http://www.patreon.com/user?u=3364742 ❱ Facebook – http://facebook.com/bisforbuild ❱ Instagram – http://instagram.com/bisforbuild…
Here’s The Problem With Building A Car Like This On Youtube…
Head to http://www.kovespeakers.com/bisforbuild and get 65% off! In todays episode its a quick update about the frame rails, 3rd times a charm!! ❱ Shop –…
We’ve Got Legroom! 240Z Frame Rail Modifications
In todays episode were cutting out the old frail rail drop downs and building some better ones! ❱ Shop – http://bisforbuild.com/ ❱ Patreon – http://www.patreon.com/user?u=3364742…
Designing My V10 Powered Widebody 240Z
In todays episode we are figuring out how we want the 240Z to look, and what pieces were going to need to build before SEMA…
Prepping The New 240Z Body For Mounting On The Frame
In todays episode were cutting out the floor pans, trunk pan, and transmission tunnel from the 240z to prepare it for mounting on the chassis….
IS THAT ALL RUST!? – Sandblasting The 240Z Body
In todays episode we do some media blasting on the 240z body and then install the rear struts on the chassis. ❱ Shop – http://bisforbuild.com/…
Mounting The 240Z Body To The Frame
In todays episode were finishing trimming up the body and building the frame, and then were mounting the body onto the frame for the first…
Designing the 240z Roll Cage & Figuring out the Driveshaft
In todays episode we start by figuring out a solution to our driveshaft misalignment issue, and then we design the roll cage for the 240z!…
