Tag: 240z
240z Gets Custom Built Floor Pans, Firewall, And Trunk!
In todays episode we start off with some rust repair and then jump into building custom floor pans, firewall, and trunk to seal this baby…
We Built The Car Everyone Said Was Impossible – Last Day Of The 240z Build Before SEMA!
In today’s episode we’re in a mad dash to finish the build and have it on the truck in time for SEMA 2018. Huge thanks…
Road Tripping The V10 240z To Sema
In today’s episode were heading off from Portland Oregon down to Las Vegas to get the 240z into the sema show. With a little tuning…
We Left Our Mark! – Bringing The 240Z To SEMA 2018
In todays episode im bringing you behind the scenes showing you what it was like bringing my V10 240z to SEMA 2018. Thanks to speedhunters…
Finally Getting Good Paint On The 240z!
Today we’re painting the 240z, changing the rod bearings, and building a front splitter. Be sure to head to http://www.kovespeakers.com/bisforbuild and get 65% off! ❱…
We Fixed The 240Z Transmission! It Was Such A Stupid Problem..
In todays episode we are troubleshooting through the computer to fix the dreaded transmission limp mode! ❱ Shop – http://bisforbuild.com/ ❱ Game – http://disfordrift.com ❱…
THE 240Z IS ALIVE!! You won’t believe why it wouldn’t start..
In todays episode i learn a bunch about the bmw wiring system and make that BMW V10 engine run!! ❱ Shop – http://bisforbuild.com/ ❱ Game…
Building An Insane Rear Diffuser For The 240z
In todays episode we start in on building the rear diffuser for the 240z, we also do some painting on the trim and cleanup on…
Building DIY Window Louvers For The 240z
In today’s episode were building some DIY window louvers, getting a windshield installed, and working on the never ending doors. Huge thanks to Canyon Sport…
2 Days Of Insane Progress on the V10 240z
In todays episode we fully mount up all the body panels, finish installing the widebody kit, finish the trans tunnel, reinforce the floor, and shave…
Starting on the Exhaust and Finishing Steering for the 240Z
In today’s episode we’re getting a start on the exhaust and wrapping up all of the steering components. Check out GBE Mandrel Bending! http://gbemandrel.com ❱…
