In this video I show you the process I use to diagnose the HVAC unit on a GMC Acadia. The customer complaint is that it blows HOT air on the driver side vents and cold air on the passenger side vents.
If an SMA Video has helped you out please consider giving using “Patreon” to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
CHECK OUT OUR “SMA SWAG” STORE! Go on Teespring and get your very own SMA merch!
https://teespring.com/stores/the-sma-store
If you don’t like Patreon feel free to use the “PayPal Me” link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=https://www.aeswave.com/Miscellaneous-p9347.html
Thank you for all the continuing support!
–Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don’t know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Thank you!
How do I set my defrost actuator just replace, origial was shot
Thx ðŸ‘
Thanks for your video. It helped me with my research, which fixed the same issue, and now everyone is happy 😊
False,..he actuator It does not control the temperature only rather the position of the blower… changed it and it now controls the dampers but it keeps blowing hot air…ouch
Does this apply to a 2017 model as well ?
Whew. Thank you!
This issue is exactly what started with my wife’s ‘12 Acadia just yesterday. I will proceed with ordering a new actuator.
Best YouTube car repair video ever…. The detail is fantastic! It helps that I have that same problem on my 2012 Acadia
Hey Eric.
I see this video is a couple years old. I have the exact same problem only my passenger side is hot.
I’m an engineer not a mechanic so I think I can fix anything but don’t have any of the fancy tools. So I couldn’t test anything so I just replaced the actuator furthest from the center. But it didn’t make any difference. The heat is still super hot on that side.
What else could it be if it’s not the actuators??
I had this problem and fixed it myself by doing a reset. turns out it was just the computer confused and had the blender door stuck, after reset , had to do it a few times (5 times) it now works better than ever. saved myself hundreds. Thank you YouTube
Hey! I was looking for guidance on this matter, thanks for the good explanation! I think I can do it by myself, Lol! following from Mexico 🙂
Thanks for sharing, works well…drivers side is a whole lot easier than the passenger.
I just repaired my A/C automatic blend motor assembly by disassembling the unit, inspected the gears, inspected the large final drive gear and its copper fingers that slide on the variable resistor pad. I put more tension on the copper fingers and used the surplus lube from inside and applied it to the gears. Reinstalled the unit and started my 2012 GMC Sierra with the A/C on, varied the temp setting cold to hot and back again, IT WORKS! Just my time and no parts.
So what would this cost for a shop to fix?
Great video. Thank you!!!👌to anyone that has a similar issue, I replaced the actuator at first but it wasn't working, (doesn't matter drivers or passenger side same thing.) but my driver side was only stuck on hot. After I replaced it, it really didn't do much. I don't have the fancy machine so I had to recalibrate the temperature manually, you have to set the temperature to either hot or cold, (see the actuator turn) I set it to cold so now the electrics/actuator is set to cold. Now have to manually turn the thermostat all the way to cold so this way the electric actuator and the thermostat are aligned together to cold. From there I couldn't get the actuator to sit nicely to screw in so I turned the temp up on the dash a little until the screw holes lined up. The point of these instructions is so you don't ruin your new actuator by turning it manually and to calibrate it. Lastly I unplugged the 15 Amp HVAC fuse under passenger side to recalibrate it that way as well.
Thanks
Any idea what hot in rear, cold in front when on ac on both on Buick enclave?
Mine I just bought does this how much does something like this cost to fix
I like your videos very much but this one was definitely a waste of time and money. 20 minutes and a 12 dollar part off of amazon very common problem I just did mine on my buick enclave
Does it need to be recalibrated once you changed the actuator or will it recalibrate itself after a while?
In my days, we had a Mr. Wizzard for learning things that were interesting, and aided in some school work. Now we have you to make up for this.. Education and logic, so much of that GOOD logic board that you posessis.. Thank you for that and your humor a great addition for we seniors.. Mrs. "O" adds so much to the enviorment…of SMAR Thanks again for the education and humor.. Alan
My 05 Buick Terrazas side actuator is missing something right by its left side. The passenger side does not blow hot air as well as the middle right side. What do I do?
I am looking for a scan tool and I see yours. Why did you choose this one and what should I look for when buying one?
Thanks, Matt
07 buick lucerne drivers side Luke warm/cool passenger side ice cold do you think my Actuator is bad . Need a video of changing one of these on the buick lucerne lol
I have an 2011 traverse and it started tapping in the dash. Seems to be back dash by the firewall
Good video. I have the identical problem in my 2011 Buick EnClave. At 60 degrees cold on passenger side and hot on drive side. I am 72 yrs old so crawling under the dash is to difficult for me. Took the car into my Buick dealer. There diagnostic came up with three error codes. They replaced the blend door Activator on the passenger side. That eliminated two of the Error codes. The mechanic now is suggesting Pulling the HVAC head or controller and check the circuitry in that. If that needs to be replaced it is a $300 plus part. Could you give me some advice on this matter.Thanks for your informative video.
Thank you for this. We just got my girlfriend’s 2011 GMC Acadia back from having the dealership work on the “transmission shifter module assembly†because the gear shift wouldn’t shift all the way into park, release the trigger on the gear shift knob, and let you turn the key all the way off and take it out of the ignition (a video on how to fix this problem without having to take it to the dealership next time would be glorious).
The vehicle was/is also having the exact problem you solved in this* video, but after the dealership told us, “…for the ac concern, the ac compressor is locked up and rear evap is leaking so both need to be replaced, cost of this repair is $2,516.81,†we told them to hold off on messing with the AC. I personally can’t afford an arm, leg, left testicle, and first-born child to “fix†the ac compressor when the passenger side blows cold air just fine. I think I’ll just order a $77 AC Delco or certified original GM parts actuator and see if that doesn’t just fix the problem.
Much appreciated; keep up the good work!
Great info!!
It was very informative for those of ho love to do-it-yourself
genuine GM, made in India, good one. 🙂
I have this problem. I have the new HVAV blender for the passenger side. Just haven’t gotten around to replacing it
Could this be the same reason when I turn on my heater and it blows hot on driver side but cold on passenger side ? I have 09 Acadia
Got a 2012 traverse I'm looking at right now. I'm a Toyota tech but I like to learn knew systems, especially lately. I have codes for left door, right door and recirculation motor! Another tech looked at it and tried the HVAC control with no success. I'm looking at the diagram tonight and gonna do some testing tomorrow, but I think he got fooled on the no command from module due to the codes being set. Anyway thx for the video you always make it look really easy when honestly modern electrical systems can throw a lot of ppl through a loop, including me! If they are actually trying to read a diagram and diagnose that is. Great vid as always. Making hard stuff simple and to the point. Keep up the good work bruh.
I've changed all 4 blend door actuators on my 2017 acadia and the driver's side is still blowing warm. Cold on passenger side. 30 psi refrigerant on low pressure line. Am i suppose to get them calibrated?. Everything is still working the same as before i replaced them
Drivers blend door actuator in the same location on a 2017 Acadia?
Why does short refrigerant charge cool only passenger side and not driver side?
I have a 2011 gmc acadia denali-bought used. Ive already did alot of repairs-never taken care of b4. My ac does opposite-dr side cold-passenger hot. Its going bk to garage again to be ckd. Thank you