Smashed Electrical! Engine Stalling! Infinity G35 3.5 Collision Damage?

41 thoughts on “Smashed Electrical! Engine Stalling! Infinity G35 3.5 Collision Damage?”

1. That shifter knob reminds me of the old 82- whenever camaros with the shifter ball shaped handle coming off in ur hand when shifting from drive to park .

2. I would think you could test it first then tape it. Just in case something is wrong you wouldn't have to take the tape off to fix it.

3. Why can't you just use a generic 4 wire connector not designed specifically for that wire?

4. You couldn't get one from a salvage yard wiring harness?

5. You think that saying either and either is bad, try to decide whether to say neither, neither or nor.

6. I've said it before, please don't get the same ringer as the dealership.

7. Or maybe the one with anti seize was opened, had anti seize applied but the user changed their mind and returned the sensor.

8. You got it right

9. Good job today 😅😊

10. Is right

11. Good 👍

12. Please help me on my 2007 Suzuki sx4 with code po172. Replaced both O2 sensors with sensors. New catalytic converters. New maf sensor. Check engine light is still on. I will tow it all the way to you!!!

13. Brilliant diagnosis and repair!!!

14. The rust on that car is rusted.

15. All two door G's have heavy doors that are designed to "self close" with minimum effort. The down side is they don't usually stay open unless you open them very wide. They all do that from day one in the stealership so that is just normal. Not sure why the customer insists on changing all O2 sensors… Just needs a fuse and that one O2 connector replaced. I hope the shop advised the customer it is not needed and would be better off spending the money on new tpms sensors and a new shift knob.

16. That will work!

17. no electrical connectors? I would use a connector. No one wants to cut wires. 😮

18. Liked

19. What is the plural of infinity since infinity is already the maximum number? Once you figure out plural for Lexus you can work on this.

20. The first sensor has issues with the connectors being recieded into the coupler. A patch would have been a short term repair. Replacement was a better choice. The sensors were replaced at customer's request.

21. Parts have feelings too! Thanks for recognizing that Ray.

22. Your commitment to your customers is first class

23. IT WAS GOOD RAYMOND.VERY INTERESTING ON HOW YOU TRACT EVERYTHING DOWN LOVED IT. GREG

24. How many volts is that ultra-bright high lighter?

25. Another job well done

26. Not sobadas cameraman, but great as a meccanic

27. I find this a malicious practice from the shop to upsell customer for 4 sensors instead of 30cent fuse. I'm happy that you no longer work there.

28. It's right

29. No, you did a great job. Don’t worry about nothing you could’ve did it with your eyes close.😊

30. looks good , send it home

31. Correct

32. Try to tie your shoes doing with your left hand what your right hand normally does and with your right what your left normally does.

33. 26:45 – if that is toxic we are both toxic. I hate when I find a design flaw and redesign it in my head before I get it fixed.

34. 😵‍💫👉 What is slang for ether?

    Shortly after Nas released the song, the word "ether" entered the hip hop lexicon as a slang expression, meaning to ruthlessly humiliate an opponent.

35. Another good repair an have a great day Ray

36. Excellent ❤

37. Gd video ray

38. Obviously teflon coated wire.. Hard to strip but great resistance to heat. Poor abrasion resistance.

39. I have been splicing wires for 66 years, and never did as good a job as Ray did.

40. Awesome complete repair. A job done right. God Bless you Ray.

41. I think your videos are awesome especially when your phone rings (do do dah da diddly)🤣🤣

Comments are closed.